...: earc_wangst@163.com Contributed by the International Gas Turbine Institute (IGTI) of ASME for publication in the J ournal of T urbomachinery . 23 06 2022 13 12 2022 14 12 2022 09 01 2023 cavity and leaking flows computational fluid dynamics impact on cavity leaking flows...

... ournal of T urbomachinery . 21 01 2022 27 08 2022 29 08 2022 07 10 2022 film cooling effectiveness PSP measurement laid-back fan-shaped hole fan-shaped hole key geometrical parameter computational fluid dynamics heat transfer and film cooling measurement techniques...

... 05 2022 01 08 2022 compressor stall surge and operability computational fluid dynamics fan, and compressor aerodynamic design Department for Business, Innovation and Skills 10.13039/501100004800 113075 The importance of leading edge (LE) geometry...

...: sacharya1@iit.edu Email: forrest.ames@engr.und.edu Contributed by the International Gas Turbine Institute (IGTI) of ASME for publication in the J ournal of T urbomachinery . 23 09 2020 06 06 2021 07 06 2021 13 07 2021 computational fluid dynamics fluid dynamics...

.... Thus, it is crucial to accurately predict the flow physics and induced wall heat transfer rate inside these cavities to optimize the overall design and enhance the safety of an engine. computational fluid dynamics fluid dynamics and heat transfer phenomena in compressor and turbine components...

... 2021 boundary layer development computational fluid dynamics fan compressor large eddy simulation fluid dynamics and heat transfer phenomena in compressor and turbine components of gas turbine engines Gas turbines are important energy production machines in modern industry...

... flow field distortion core engine operability compressor stall surge and operability computational fluid dynamics fluid dynamics and heat transfer phenomena in compressor and turbine components of gas turbine engines As the bypass ratio of future turbofan engines reach high values...

... passage, the extent of which directly affects the aerodynamic loss in the stage. This paper presents a combined experimental and computational fluid dynamics (CFD) investigation into the effect of purge flow on the secondary flows in the blade passage of an optically accessible one-stage turbine rig...

... flow. Computational fluid dynamics (CFD) simulations were performed to ensure this leading-edge extension did not impact on the flow downstream of the throat. Fig. 3 Cascade geometry showing modification of vane design Cascade geometry showing modification of vane design An annular...

.... Experiments and computational fluid dynamics (CFD) simulations were carried out in the framework of the European Project RECORD and on its follow-up. Measurements considering burner-representative temperature perturbations injected upstream of an un-cooled high-pressure gas turbine stage were performed...

... – 2116 . 10.2514/1.12033 [6] Smith , B. L. , and Swift , G. W. , 2001 , “ Synthetic Jets at Large Reynolds Number and Comparison to Continuous Jets ,” 15th AIAA Computational Fluid Dynamics Conference , Anaheim, CA , June 2001 . [7] Smith , B. L. , and Swift , G. W...

... appear to interact with the supply condition, altering the jet lateral spreading and the overall heat transfer performance. computational fluid dynamics fluid dynamics and heat transfer phenomena in compressor and turbine components of gas turbine engines heat transfer and film cooling measurement...

...: fernando.gisbert@itp.es Contributed by the International Gas Turbine Institute (IGTI) of ASME for publication in the J ournal of T urbomachinery . 14 10 2019 28 11 2019 02 12 2019 18 12 2019 boundary layer development computational fluid dynamics turbine aerodynamics large...

... in the United Technologies Research Center (UTRC) Acoustic Research Tunnel, an ultra-low freestream turbulence facility capable of laminar boundary layer research. Boundary layer computational fluid dynamics and stability modeling were used to provide pre-test predictions, as well as to aid in interpretation...

... Transfer Division of ASME for publication in the J ournal of T urbomachinery . 21 09 2018 05 11 2019 05 11 2019 12 11 2019 computational fluid dynamics inlet distortion fan and compressor distortion response Fans and first stage compressors in modern and future...

...@turing.ac.uk Email: pgt23@cam.ac.uk Contributed by the Heat Transfer Division of ASME for publication in the J ournal of T urbomachinery . 14 05 2019 22 11 2019 22 11 2019 09 12 2019 computational fluid dynamics Three-dimensional corner separation, which...

... 06 2019 10 09 2019 aeromechanical instabilities computational fluid dynamics Aeroelasticity is one of the main concerns during the design of future jet engines. Due to large diameter and light materials, flutter may be experienced by fan blades. Computational fluid dynamics...

.../Computational Fluid Dynamics Thermal Coupling for Engineering Applications ,” ASME J. Turbomach. , 132 ( 3 ), p. 031016 . 10.1115/1.3147105 [17] Errera , M. P. , and Baqué , B. , 2013 , “ A Quasi‐Dynamic Procedure for Coupled Thermal Simulations ,” Int. J. Numer. Methods Fluids , 72 ( 11...

... in the J OURNAL OF T URBOMACHINERY . Manuscript received September 28, 2017; final manuscript received July 9, 2018; published online August 28, 2018. Assoc. Editor: Anestis I. Kalfas. 28 09 2017 09 07 2018 Computational fluid dynamics Fluid dynamics Heat transfer phenomena...

... into which high-fidelity simulations can provide detailed insights. However, due to limitations on the computational resource, the use of an eddy resolving method for a fully resolved fan calculation is currently infeasible within industry. To solve this problem, a mixed-fidelity computational fluid dynamics...