... Sintering ,” Int. J. Mach. Tools Manuf. , 47 ( 6 ), pp. 985 – 995 . 10.1016/j.ijmachtools.2006.07.001 [13] Luo , Z. , and Zhao , Y. , 2018 , “ A Survey of Finite Element Analysis of Temperature and Thermal Stress Fields in Powder Bed Fusion Additive Manufacturing ,” Addit. Manuf. , 21...

.../compression. These equations enable the design of LET arrays for a variety of applications, including origami-based mechanisms. These general equations are verified using finite element analysis, and to show variability of the LET array design space, several verification plots over a range of parameters...

.... The paper closes with the results of high fidelity simulations, based on finite-element analysis (FEM) and numerical fluid-structure interaction (FSI), which allow predicting the system response in a more accurate way. After having reported the key findings of this low-fidelity analysis, the design...

... truth locomotion finite element analysis remote sensing Miscanthus has become one of the most popular nonstraw, biofuel crops that is widely distributed in Asia and the Pacific. This energy grass is currently a commercial crop in Europe and America. The grass has a high yield, perennial growth...

... with lower function values when the synthesis problem is posed using a minimization objective. Synthesis of CCMs is exemplified for path generation applications though the proposed method can be employed for any generic kinematic task. design engineering finite element analysis friction hinges...

... 09 12 2011 cantilevers design engineering finite element analysis friction haptic interfaces materials properties optimisation performance evaluation rendering (computer graphics) shear deformation snap fitting snap-fit cantilever hook assembly disassembly virtual force...

... and may save metal. References 1 Hoon , H. , and Kim , S. , 2001 , “ Optimum Process Design in Sheet-Metal Forming With Finite Element Analysis ,” ASME J. Eng. Mater. Technol. , 123 ( 4 ), pp. 476 – 481 . 10.1115/1.1395579 2 Ohata , T. , Nakamura , Y. , Katayama , T...

... finite element analysis iterative methods pulleys flat belt transmission film belt skew lateral traverse pulley misalignment friction theoretical solution FEM Model and deployment of belt and pulleys in case of out-of-plane misalignment The film belt is modeled with 4...

.... 24 11 2010 03 07 2011 09 09 2011 09 09 2011 aircraft failure (mechanical) fatigue finite element analysis insulated gate bipolar transistors Monte Carlo methods power semiconductor switches probability reliability solders statistical analysis structural engineering...

... 08 2011 10 08 2011 biomedical equipment design engineering finite element analysis The benefits of compliant mechanisms (CMs) have stimulated their role in numerous applications including surgical instrument design. Usually machined from monolithic materials, CMs are jointless...

... method, frequency spectrums of the transient and steady states of the calculated transmission errors are obtained to enable the gearbox designer to avoid the resonance zone. elastic deformation fast Fourier transforms finite element analysis friction gears impact (mechanical) mechanical contact...

.... 852 – 857 . 10.1115/1.2735343 24 Hoffmann , K. , 1989 , An Introduction to Measurements Using Strain Gages ( HBM , Darmstadt , 1989 ). design engineering discs (structures) finite element analysis gears strain gauges stress analysis In accordance with modern...

... with nonlinear finite element analysis and experimental force-displacement data. Paper presented at the ASME 2010 Design Engineering Technical Conference and Computers and Information in Engineering Conference (DETC2010), Montreal, Quebec, Canada, August 15–18, 2010. Underconstrained mechanisms have...

... buckling region but caution should be used when relying on the analyses near the demarcation line. Also, if using the offset force technique in a finite element analysis, the predictions for the vertical forces with small vertical displacements should be taken in context with the relative magnitude...

... design domain and boundary conditions of the two-dimensional heat convection problem 20 06 2010 03 02 2011 15 03 2011 15 03 2011 design engineering finite element analysis heat transfer optimisation thermodynamics This paper discusses a level set-based...

.... The torsional spring design is investigated and analyzed to attain the lowest possible stress level while maintaining a constant resonant frequency. The finite element analysis model of the torsional spring was created and the stress was minimized by changing the geometrical parameters of the spring. Spring...

... frequency of the beam can be controlled by increasing the elastic moduli of SMA on heating. 29 09 2009 10 11 2010 03 01 2011 03 01 2011 bending carbon fibre reinforced plastics finite element analysis honeycomb structures shape memory effects Since honeycomb sandwich...

... in windmills. cantilevers drives finite element analysis gears machine bearings springs (mechanical) 05 11 2009 03 11 2010 29 12 2010 29 12 2010 2011 American Society of Mechanical Engineers ...

... dynamics (CFD), and then the most dangerous locations on the combustor were predicted by means of the 3D finite element analysis method. The study demonstrates the effectiveness of CFD and stress modeling for the design and improvement of the microcombustors. For Fig. 7 , the failure location...

...   mm 2 with 170   μ m thickness, the same dimensions of the actuators or cantilevered beams used in the finite element analysis and kinematic analysis. Experiments were conducted to evaluate the rectilinear displacement and force outputs for two cases: (i) the multistable linear...