This paper is a continuation of previous papers by the authors that focuses on predicting the mistuned embedded rotor blade forced response. The compressor under consideration is a part of a 3.5stage rig located at Purdue University. Previously, the current authors have discussed the impact of sideband travelling wave forcing functions on the mistuned response and pinned down the reason for a constant underprediction in the amplification factor. This prompted further research to determine the sensitivity of the response to a known change in the system mode. In the first section of the current paper, the authors perturb the system modes frequencies in a probabilistic manner and compute the influence of the system mode on the mistuning amplification factor. The second part of this study involves determining the impact of a perturbation in the structural damping on the mistuned response. Finally, a brief investigation of system eigenvalues and eigenvectors is conducted to understand the impact of mistuning on aerodynamic damping suppression. The key conclusions from this paper are: 1) The mistuned forced response was highly sensitive to the system mode input. 2) Since the aerodynamic damping dominates in the case study, a change in the structural damping parameter has minimal effect on the mistuning amplification factor. 3) The results of the flutter analysis show that a perturbation in the system mode frequency stabilizes the system much faster than a perturbation in the structural damping .