This paper addresses the tracking control of hydraulic actuators commonly used in many hydraulically actuated robotic systems. Dynamic model of the entire actuator incorporating highly nonlinear hydraulic functions and the LuGre dynamic friction model is used to arrive at a suitable controller. The controller is augmented with adaptation laws to compensate for parametric uncertainties in the actuator dynamics, hydraulic functions as well as friction with nonuniform force variations. Furthermore, an adaptive observer is used in the controller to avoid the use of acceleration measurement. Therefore, only measurements of displacement, velocity, and hydraulic line pressures are required for the implementation of the proposed controller. Stability and convergence of the control system are theoretically studied. Experimental results are presented verifying the effectiveness of the developed controller.
Skip Nav Destination
e-mail: nariman@cc.umanitoba.ca
Article navigation
January 2008
Technical Briefs
Tracking Control of Hydraulic Actuators Using a LuGre Friction Model Compensation
Hairong Zeng,
Hairong Zeng
Graduate Research Fellow
Department of Mechanical and Manufacturing Engineering,
The University of Manitoba
, Winnipeg, Manitoba R3T-5V6, Canada
Search for other works by this author on:
Nariman Sepehri
Nariman Sepehri
Department of Mechanical and Manufacturing Engineering,
e-mail: nariman@cc.umanitoba.ca
The University of Manitoba
, Winnipeg, Manitoba R3T-5V6, Canada
Search for other works by this author on:
Hairong Zeng
Graduate Research Fellow
Department of Mechanical and Manufacturing Engineering,
The University of Manitoba
, Winnipeg, Manitoba R3T-5V6, Canada
Nariman Sepehri
Department of Mechanical and Manufacturing Engineering,
The University of Manitoba
, Winnipeg, Manitoba R3T-5V6, Canadae-mail: nariman@cc.umanitoba.ca
J. Dyn. Sys., Meas., Control. Jan 2008, 130(1): 014502 (7 pages)
Published Online: January 14, 2008
Article history
Received:
January 26, 2006
Revised:
June 19, 2007
Published:
January 14, 2008
Citation
Zeng, H., and Sepehri, N. (January 14, 2008). "Tracking Control of Hydraulic Actuators Using a LuGre Friction Model Compensation." ASME. J. Dyn. Sys., Meas., Control. January 2008; 130(1): 014502. https://doi.org/10.1115/1.2807181
Download citation file:
Get Email Alerts
Predictive Generalized Active Disturbance Rejection Control for Fractional Order Systems With Time Delay
J. Dyn. Sys., Meas., Control (July 2023)
A Method for Designing of Hydraulic Actuators Using Digital Hydraulic Pump and Multi-Chamber Cylinder
J. Dyn. Sys., Meas., Control
A Method for Robust Partial Quadratic Eigenvalue Assignment with Repeated Eigenvalues
J. Dyn. Sys., Meas., Control
Designing Hybrid Neural Network Using Physical Neurons - A Case Study of Drill Bit-Rock Interaction Modeling
J. Dyn. Sys., Meas., Control
Related Articles
Impact Control in Hydraulic Actuators
J. Dyn. Sys., Meas., Control (June,2005)
Tip-Over Stability of Manipulator-Like Mobile Hydraulic Machines
J. Dyn. Sys., Meas., Control (June,2005)
A Combined Scheme for Identification and Robust Torque Control of Hydraulic Actuators
J. Dyn. Sys., Meas., Control (December,2003)
An Approach to Identify Joint Motions for Dynamically Stable Walking
J. Mech. Des (May,2006)
Related Proceedings Papers
Related Chapters
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Auto-Tuning Method of PIDA Controller Based Ongain Margin and Phase Margin
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Research on Autobody Panels Developmental Technology Based on Reverse Engineering
International Conference on Advanced Computer Theory and Engineering, 5th (ICACTE 2012)