... of the separation vortex was moved to the midchord and formed a significant loss region. Thus, the tip leakage flow reduced the loss region, and the overall loss was reduced. axial compressor windmill condition internal flow CFD DES tip clearance Proceedings of the ASME 2022 Fluids Engineering...

... components are inseparable. In general, the goal is to link physical processes to various components in the control volume assessments that are measurable in detailed computational fluid dynamics (CFD) models. The effort utilizes the Method of Manufactured Solutions (MMS) to verify detailed insight can...

.... The vortex rings tilt perpendicular to the main flow as they develop but dissipate due to the rotation of the high-velocity jet and transform into numerous elongated vortices. sweeping jet jet in cross flow vortex CFD Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting...

... comparisons were examined. The experimental comparison benchmarked the temperature ratio of particles at varying thermal Stokes numbers against the experimental correlation shown in Bojdo et al. [1]. multiphase melting volume-of-fluid CFD Proceedings of the ASME 2022 Fluids Engineering Division...

... Abstract Forces acting on both gas and particle phases and the interaction between them and the liquid phase in liquid-gas-solid flow are examined via Computational Fluid Dynamics (CFD) and the results are compared with experimental data. A simplified methodology to simulate multiphase flow...

... for and understanding situations with bluff body wakes. CFD bluff body wake optimization Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting FEDSM2022 August 3-5, 2022, Toronto, Ontario, Canada FEDSM2022-87937 OPTIMIZATION OF AN ELLIPTICAL FAIRING IN THE WAKE OF A D-SHAPED BLUFF BODY...

... through momentum exchange. By studying water braking using Computational Fluid Dynamics (CFD), forces acting on track vehicles can be approximated and prepared for prior to actual test. In this study, focus will be made on the brake component of the track sled that is responsible for interacting...

..., both experiment and CFD (Computational Fluid Dynamics) calculations were conducted. In the experiment, two kinds of pump (one is original and another is with slit vanes) characteristics and time history of static pressure were measured. Then, data processing of wave form were conducted by FFT (Fast...

... before proving their added value. Facilitated by the emergence of cloud computing, computer-aided engineering (CAE) technology is now offered as a software as a service (SaaS) solution, which increases its accessibility and ease of use. Online fluid flow (CFD) simulation is used in addressing a broad...

... Abstract The use of ejector cycles for increased performance and efficiency is becoming more prevalent in industry. The goal of this study is to evaluate an ejector using Computational Fluid Dynamics (CFD) to evaluate flow patterns, perform trade studies varying the type of refrigerant...

... was to simulate the heat transfer from the TWAS torch to the substrate during spraying and layer formation of a coating. Simulations using ANSYS FLUENT Computational Fluid Dynamics (CFD) software were used to model the heat transfer in a TWAS system. The results of this paper are meant to augment and improve...

... Abstract This paper presents results of Computational Fluid Dynamics (CFD) modeling and experimental wind tunnel testing to predict the drag coefficient for a Human Powered Vehicle (HPV) entered in the World Human Powered Speed Challenge (WHPSC). Herein, a comparison of CFD to wind tunnel test...

... that typical algorithm for determination of the calibration factor is very questionable since it contains simplified information about velocity profile distribution. Trying to fix this problem, we applied computational fluid dynamics (CFD) modelling of ultrasonic meters with different variants of flow...

... in diffuser. As a result, corresponding optimization design method is proposed, the total-to-total aerodynamic efficiency of the redesigned compressor has increased 5% at design point. centrifugal compressor CFD loss analysis aerodynamic optimization Proceedings of the ASME 2021 Fluids...

... sensitive acoustic sensors. Two series of numerical simulations utilising Computational Fluid Dynamics (CFD) – Reynolds-Averaged Navier-Stokes (RANS) model, were performed to accurately predict the rate of the oil spill and the corresponding trajectory to the free-surface at Reynolds number Re range from...

... Abstract In the oil and gas industry, sand particle erosion damage to elbows is a common problem. The ability to predict erosion patterns is of great importance for sizing lines, analyzing failures, and limiting production rates. Computational fluid dynamics (CFD) can be utilized to study...

... thermal plume, the aspiration efficiency of small micro-particles increases significantly. lying mannequin aspiration efficiency CFD turbulent flow Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021-65652 INFLUENCE...

... speeds and lower manufacturing costs (CAPEX). Computational Fluid Dynamics (CFD) simulations were performed to investigate the effect of flowing water (in the microfluidic channel) on the average absolute pressure and temperature of air in the actuation chamber. The CFD simulations were performed using...

... students’ spirit of inquiry, and ultimately leads to a professional development opportunities beyond the classroom setting. CFD simulations assessment Ansys Fluent Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021...

... accuracy in terms of the mean velocity profile as well as drag partition across the range of packing densities. CFD DNS LES RANS Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021 August 10-12, 2021, Virtual, Online FEDSM2021-65494 MODELING OF CUBE ARRAY...