0
REVIEW ARTICLES

Selected topics in the history of the two-dimensional biharmonic problem

[+] Author and Article Information
VV Meleshko

Department of Theoretical and Applied Mechanics, Kiev National Taras Shevchenko University, 01033 Kiev, Ukraine; meleshko@univ.kiev.ua

Appl. Mech. Rev 56(1), 33-85 (Jan 15, 2003) (53 pages) doi:10.1115/1.1521166 History: Online January 15, 2003
Copyright © 2003 by ASME
Your Session has timed out. Please sign back in to continue.

References

Lamé G (1859), Leçons sur les coordonnées curvilignes et leurs diverses applications, Mallet-Bachelier, Paris.
Jeffery  GB (1920), Plane stress and plane strain in bipolar co-ordinates, Philos. Trans. R. Soc. London, Ser. A 221, 265–293.
Clebsch A (1883), Théorie de l’élasticité des corps solids, Dunod, Paris.
Boobnoff [Bubnov]  IG (1902), On the stresses in a ship’s bottom plating due to water pressure, Trans. Inst. Naval Arch. 44, 15–46, (1902), On the stresses in a ship’s bottom plating due to water pressure, 44, 47–52 (discussion). (Also in Engineering 73, 384–385, 390–392.)
Biezeno CB (1925), Graphical and numerical methods for solving stress problems, Proc of 1st Int Congress for Applied Mechanics, CB Biezeno and JM Burgers (eds), Waltman, Delft, 3–17.
Love  AEH (1928), Biharmonic analysis, especially in a rectangle, and its application to the theory of elasticity, J. London Math. Soc. 3, 144–156.
Dixon  AC (1934), The problem of the rectangular plate, J. London Math. Soc. 9, 61–74.
Yates  JA (1891), The internal stresses in steel plating due to water pressure, Trans. Inst. Naval Arch. 32, 190–203, 203–210 (discussion). (Also in Engineering 51, 397, 629–630.)
Montgomerie  J (1917), Stress determination in a flat plate, Trans. Inst. Naval Arch. 59, 33–42, 42–48 (discussion). (Also in Engineering 104, 35–38, 75–77.)
Montgomerie  J (1919), Further experiments on stress determination in flat steel plates, Trans. Inst. Naval Arch. 61, 281–289, 289–297 (discussion). (Also in Engineering 107, 528–529, 786–790.)
Inglis  CE (1925), Stresses in rectangular plates clamped at their edges and loaded with a uniformly distributed pressure, Trans. Inst. Naval Arch. 67, 147–165. (Also in Engineering 119, 444–445.)
Lamble  JH and Shing  L (1947), A survey of published work on the deflection of and stress in flat plates subject to hydrostatic loading, Trans. Inst. Naval Arch. 89, 128–142, 143–147 (discussion).
Lamble  JH and Choudhary  JP (1953), Support reactions, stresses, and deflections for plates subjected to uniform transverse loading, Trans. Inst. Naval Arch. 95, 329–343, 343–349 (discussion).
Love AEH (1892), A Treatise on the Mathematical Theory of Elasticity, Vol 1, Cambridge Univ Press, Cambridge.
Love AEH (1893), A Treatise on the Mathematical Theory of Elasticity, Vol 2, Cambridge Univ Press, Cambridge.
Love AEH (1906), A Treatise on the Mathematical Theory of Elasticity, 2nd Edition, Cambridge Univ Press, Cambridge, Also: 3rd Edition (1920).
Love AEH (1907), Lehrbuch der Elastizität, Teubner, Berlin.
Love AEH (1927), A Treatise on the Mathematical Theory of Elasticity, 4th Edition, Cambridge Univ Press, Cambridge (Reprinted: Dover, New York, 1944).
Lorenz H (1913), Lehrbuch der Technischen Physik. Band 4. Technische Elastizitätslehre, Oldenbourg, München.
Westergaard HM (1952), Theory of Elasticity and Plasticity, Harvard Univ Press, Cambridge MA.
Todhunter I and Pearson K (1886), A History of the Theory of Elasticity and of the Strength of Materials from Galilei to Lord Kelvin. Vol I. Galilei to Saint-Venant, 1639–1850, Cambridge Univ Press, Cambridge (Reprinted: Dover, New York, 1960).
Todhunter I and Pearson K (1893), A History of the Theory of Elasticity and of the Strength of Materials from Galilei to Lord Kelvin. Vol II. Saint-Venant to Kelvin, Cambridge Univ Press, Cambridge (Reprinted: Dover, New York, 1960).
Timoshenko SP (1953), History of Strength of Materials, With a Brief Account of the History of Theory of Elasticity and Theory of Structures, McGraw-Hill, New York (Reprinted: Dover, New York, 1960). (Reviews by: Drucker  DC , Appl. Mech. Rev. 1953 6, 539–540; Ormondroyd  J , ASME J. Appl. Mech. 1954 21, 99–100; Southwell  RV , Nature (London) 1954173, 462; Taed  PL , J. Roy. Aeronaut. Soc. 1953 57, 826; Hopkins  HG , Q. Appl. Math. 195512, 440–441; Hill  R , J. Mech. Phys. Solids 19542, 138; Thomas  JSG , J. Inst. Met. 195321, 399–400; Ford  H , J. Iron. Steel Inst., London 1954176, 127–128; Forbes  RJ , Arch. Int. Hist. Sci. 19536, 533–534; Albenga  G , Scientia 195489, 140–141; Neuber  H , Zentralblatt Math. Grenz 195552, 246–247; Schleicher  F , Bauingenieur 195328, 413–414; Tellegan  C , Ingenieur 195365(40), 78; KW Johansen, Bygningsstatiske Meddelelser 1953, 24 (2), 75–76; C Truesdell, Math. Revs. 1953 14 , 1050).
Barber JR (1992), Elasticity, Kluwer Academic Publ, Dordrecht.
Biezeno CB and Grammel R (1939), Technische Dynamik, Julius Springer-Verlag, Berlin.
Ciarlet PG (1997), Mathematical Elasticity, Vol II, Theory of Plates, Elsevier, Amsterdam.
Coker EG and Filon LNG (1931), A Treatise on Photo-Elasticity, Cambridge Univ Press, Cambridge.
Föppl A and Föppl L (1920), Drang und Zwang, Oldenbourg, München.
Frocht MM (1948), Photoelasticity, John Wiley and Sons, New York.
Girkmann K (1963), Flächentragwerke. Einführung in die Elastostatik der Scheiben, Platten, Schalen und Faltwerke, 6th Edition, Julius Springer-Verlag, Wien.
Gould PL (1994), Introduction to Linear Elasticity, 2nd Edition, Julius Springer-Verlag, New York.
Green AE and Zerna W (1954), Theoretical Elasticity, Oxford Univ Press, London.
Hahn HG (1985), Elastizitätstheorie. Grundlagen der linearen Theorie und Anwendungen auf eindimensionale, ebene und räumliche Probleme, Teubner, Stuttgart.
Happel J and Brenner H (1965), Low Reynolds Number Hydrodynamics, Prentice Hall, Englewood Cliffs, NJ
Lur’e AI (1970), Theory of Elasticity (in Russian), Nauka, Moscow.
Milne-Thomson LM (1960), Plane Elastic Systems, Julius Springer-Verlag, Berlin.
Muskhelishvili NI (1933), Some Basic Problems of the Mathematical Theory of Elasticity (in Russian), Izd Akad Nauk SSSR, Moscow-Leningrad. Also: 2nd Edition (1938).
Muskhelishvili NI (1949), Some Basic Problems of the Mathematical Theory of Elasticity, 3rd Edition, (in Russian) Izd Akad Nauk SSSR, Moscow-Leningrad. Also: 4th Edition (1954), 5th Edition (1966).
Muskhelishvili NI (1953), Some Basic Problems of the Mathematical Theory of Elasticity, Noordhoff, Groningen.
Richards R, Jr (2001), Principles of Solid Mechanics, CRC Press, Boca Raton.
Sokolnikoff IS (1956), Mathematical Theory of Elasticity, 2nd Edition, McGraw-Hill, New York.
Southwell RV (1936), An Introduction to the Theory of Elasticity for Engineers and Physicists, Oxford Univ Press, Oxford.
Timoshenko S (1934), Theory of Elasticity, McGraw-Hill, New York.
Timoshenko SP (1940), Theory of Plates and Shells, McGraw-Hill, New York. (English review by Nádai  A in ASME J Appl Mech 9, 53–54.)
Timoshenko SP and Goodier JN (1951), Theory of Elasticity, 2nd Edition, McGraw-Hill, New York.
Timoshenko SP and Goodier JN (1970), Theory of Elasticity, 3rd Edition, McGraw-Hill, New York.
Timoshenko SP and Woinowsky-Krieger S (1959), Theory of Plates and Shells, 2nd Edition, McGraw-Hill, New York.
Villaggio P (1997), Mathematical Models for Elastic Structures, Cambridge Univ Press, Cambridge.
Wang CT (1952), Applied Elasticity, McGraw-Hill, New York.
Agarev VA (1963), Method of Initial Functions for Two-dimensional Boundary Value Problems of the Theory of Elasticity (in Russian), Izd Akad Nauk UkrSSR, Kiev.
Babuška I, Rektorys K, and Vyčichlo F (1960), Mathematische Elastizitätstheorie der ebenen Probleme, Akademie-Verlag, Berlin.
Belluzzi O (1956), Scienza della construzioni, Vol III, Elementi di teoria dell’elasticità con applicazioni, Zanichelli, Bologna.
Boresi AP and Chong KP (1974), Elasticity in Engineering Mechanics, Elsevier, New York.
Bricas M (1936), La théorie d’élasticité bidimensionelle, Pyrsos, Athene.
Burgatti P (1931), Teoria matematica della elasticità, Zanicelli, Bologna.
Butty E (1939), Resolution estatica de sistemas planos, 2nd edition, Centro Estudiantes de Ingenieria de Buenos Aires, Buenos Aires.
Butty E (1946), Tratado de elasticidad teorico-tecnica (elastotecnia), Centro Estudiantes de Ingenieria de Buenos Aires, Buenos Aires.
Filonenko-Borodich MM (1932), Foundation of the Theory of Elasticity (in Russian), GTTI, Moscow.
Filonenko-Borodich MM (1947), Theory of Elasticity, 3rd Edition (in Russian), OGIZ-GITTL, Moscow-Leningrad.
Filonenko-Borodich MM (1959), Theory of Elasticity, 4th Edition (in Russian), Fizmatgiz, Moscow.
Filonenko-Borodich MM (1965), Theory of Elasticity, Dover, New York.
Galerkin BG (1933), Elastic Thin Plates (in Russian), Gostrojizdat, Moscow.
Godfrey DER (1959), Theoretical Elasticity and Plasticity for Engineers, Thames and Hudson, London.
Grinchenko VT (1978), Equilibrium and Steady Vibrations of Elastic Bodies of Finite Dimensions (in Russian), Naukova Dumka, Kiev. (English review in Math. Revs. 58, 2944.)
l’Hermite R (1953), Résistance des matériaux, théorique et experimentale, Tome I, Théorie de l’élasticité et des structures élastiques, Dunod, Paris.
Hlitčijev J (1950), Poglavlja iz theorije elastičnosti sa primenama, 2nd Edition, Nauchna Knijga, Beograd.
Huber MT (1954), Teoria sprȩzystósci, PWN, Warszawa.
Kolosov GV (1935), Application of Complex Diagrams and Theory of Functions of Complex Variable to the Theory of Elasticity (in Russian), ONTI, Leningrad-Moscow.
Leibenzon LS (1943), Variational Methods of Solution of Problems in Theory of Elasticity (in Russian), GTTI, Moscow. (Reprinted in: Leibenzon LS (1951), Collected Papers, AI Nekrasov (ed), Izd Akad Nauk SSSR, Moscow, 1, 177–463).
Leibenzon LS (1947), Course in the Theory of Elasticity, 2nd Edition (in Russian), OGIZ-GITTL, Moscow-Leningrad. (English review in Appl Mech Rev 1 , No. 1315).
Lecornu L (1938), Théorie mathématique de l’élasticité, Gauthier-Villars, Paris.
Little RW (1973), Elasticity, Prentice Hall, Englewood Cliffs, NJ.
Mansfield EH (1964), The Bending and Stretching of Plates, Macmillan, New York.
Marcolongo R (1904), Teoria matematica dello equilibrio dei corpi elastici, Hoepli, Milan.
Morozov NF (1978), Selected Two-dimensional Problems of the Theory of Elasticity (in Russian), Izd LGU, Leningrad.
Nádai A (1925), Der elastischen Platten, Julius Springer-Verlag, Berlin.
Novozhilov VV (1958), Theory of Elasticity (in Russian), Sudpromgiz, Leningrad.
Novozhilov VV (1961), Theory of Elasticity, Pergamon Press, Oxford.
Pank V (1975), Theory of Elastic Plates, Noordhoff, Leiden.
Papkovich, PF (1939), Theory of Elasticity (in Russian), Oborongiz, Leningrad-Moscow.
Savin GN (1951), Stress Concentration around Openings (in Russian), GTTI, Moscow-Leningrad.
Sawin [Savin] GN (1956), Spannungserhöhung am Rande von Löchern, VEB-Verlag Technik, Berlin.
Savin GN (1962), Stress Concentration around Openings, Pergamon Press, London.
Savin GN (1968), Stress Distribution around Openings (in Russian), Naukova Dumka, Kiev.
Segal’ AI (1961), Applied Theory of Elasticity, 2nd Edition (in Russian), Sudpromgiz, Leningrad.
Solomon L (1968), Élasticité linéaire, Masson, Paris.
Stiglat K and Wippel H (1973), Platten, 2nd Edition, Ernst, Berlin.
Szilard R (1974), Theory and Analysis of Plates. Classical and Numerical Methods, Prentice Hall, Englewood Cliffs NJ.
Teodorescu PP (1961), Probleme plane in teoria elasticitǎţii, 1 , Editura Acad Rep Pop Romǎnia, Bucureşti.
Teodorescu PP (1966), Probleme plane in teoria elasticitǎţii, 2 , Editura Acad Rep Soc Romǎnia, Bucureşti.
Timoshenko SP (1914), A Course in Theory of Elasticity, Part I, General Theory. Bending and Torsion of Rods. Plane Problem. Bodies of Revolution (in Russian), Kollins, St Petersburg.
Timoshenko SP (1916), A Course in Theory of Elasticity, Part II: Rods and Plates (in Russian), Kollins, Petrograd.
Timoshenko SP (1972), A Course in Theory of Elasticity, 2nd Edition (in Russian), Naukova Dumka, Kiev.
Ufliand YaS (1967), Integral Transforms in Problems of the Theory of Elasticity (in Russian), Nauka, Leningrad.
Tedone O and Timpe A (1907), Spezielle Ausführungen zur Statik elastischer Körper, Encyklopädie der Mathematischen Wissenschaften, F Klein and C Müller (eds), Teubner, Leipzig, IV/4 , 125–214.
Föppl  L (1921), Neuere Fortschritte der technishen Elastizitätstheorie, Z Angew Math Mech 1, 466–481.
Westergaard HM and Slater WA (1921), Moments and stresses in slabs, Proc Amer Concrete Inst17 , 415–538.
Geckeler JW (1928), Elastostatik, Handbuch der Physik, R Grammel (ed), Julius Springer-Verlag, Berlin, VI , 141–297.
Trefftz E (1928), Mathematische Elastizitästheorie, Handbuch der Physik, R Grammel (ed), Julius Springer-Verlag, Berlin, VI , 47–140.
Prokof’ev I (1929), Deformation, Technical Encyklopaedia (in Russian), LK Martens (ed), Sovetskaya Encyklopediya, Moscow, 6 , 578–589.
Timoshenko SP (1929), Festigkeitsprobleme im Maschinenbau, Handbuch der physikalischen und technischen Mechanik, R Hort (ed), Johann Barth, Leipzig, 4 , 146–198.
Galerkin BG (1932), Plates, Technical Encyclopaedia (in Russian), LK Martens (ed), OGIZ RSFSR, Moscow, 16 , 546–554.
Muskhelishvili NI (1936), Elasticity theory, Large Soviet Encyklopaedia (in Russian), OYu Shmidt (ed), OGIZ, Moscow, 56 , 147–158.
Dzhanelidze  GYu (1948), Review of works on the theory of bending of thick and thin plates published in the USSR (in Russian), Prikl. Mat. Mekh. 12, 109–128.
Rabotnov YuN (1950), Plates and shells, Mechanics in the USSR in 30 years (in Russian), VZ Vlasov, VV Golubev and ND Moiseev (eds), GITTL, Moscow-Leningrad, 226–239.
Sherman DI (1950), Main plane and contact (mixed) problems of the static theory of elasticity, Mechanics in the USSR in 30 years (in Russian), VZ Vlasov, VV Golubev, and ND Moiseev (eds), GITTL, Moscow-Leningrad, 193–225.
Sherman DI (1962), Methods of the integral equations in plain and space problems of the static theory of elasticity (in Russian), Proc of 1st All-Union Congress of Theoretical and Applied Mekhanics, LI Sedov (ed), Nauka, Moscow, 405–467.
Neményi PF (1951), Recent developments in inverse and semi-inverse methods in the mechanics of continua, Advances in Applied Mechanics, R von Mises and Th von Kármán (eds), Academic Press, New York 2 , 123–151.
Schmidt K (1953), Allgemeine Elastizitätstheorie, Naturforschung und Medizin in Deutschland 1939–1946, A Wlather (ed), Chemie, Weinheim, 4/II , 7–12.
Goodier JN (1958), The mathematical theory of elasticity, Surveys in Applied Mathematics, Vol 1, Elasticity and Plasticity, JN Goodier and PG Hodge (eds), John Wiley and Sons, New York, 3–47.
Sneddon IN and Berry DS (1958), The classical theory of elasticity, Handbuch der Physik, S Flügge (ed), Julius Springer-Verlag, Berlin, VI , 1–126.
Koiter  W T (1960), Complexe behandeling van het tweedimensionale elasticiteitsprobleem, Ingenieur 72, O11–O13, O26–O29.
Korenev BG (1960), The theory of plates, Structural Mechanics in the U.S.S.R 1917–1957, IM Rabinovich and G Hermann (eds), Pergamon Press, New York, 191–222.
Vekua IN and Muskhelishvili NI (1962), Methods of the theory of analytic functions in the theory of elasticity (in Russian), Proc of 1st All-Union Congress Theor Appl Mekh, LI Sedov (ed), Nauka, Moscow, 310–338.
Sliter GE, Nikolai RJ, and Boresi AP (1963), Elastic plates: Annotated bibliography 1930–1962, Univ of Illinois Bulletin, Engineering Experiment Station Reprint Series, No 10.
Teodorescu  PP (1964), One hundred years of investigations in the plane problem of the theory of elasticity, Appl Mech Rev 17, 175–186.
Gurtin M (1972), The linear theory of elasticity, Handbuch der Physik, S Flügge (ed), Julius Springer-Verlag, Berlin, VIa/2 , 1–295.
Kalandiya AI, Lur’e AI, Mandzhavidze GF, Prokopov VK, and Uflyand YaS (1972), Linear theory of elasticity, Mechanics in the USSR in 50 Years (in Russian), LI Sedov Y (ed), Nauka, Moscow, 3 , 5–70.
Horgan CO and Knowles JK (1983), Recent developments concerning Saint-Venant’s principle, Advances in Applied Mechanics, JW Hutchinson and ThY Wu (eds) Academic Press, New York, 23 , 179–269.
Horgan  CO (1989), Recent developments concerning Saint-Venant’s principle: An update, Appl. Mech. Rev. 42, 295–303.
Horgan  CO (1996), Recent developments concerning Saint-Venant’s principle: A second update, Appl. Mech. Rev. 49, 101–111.
Pao  Y-H (1998), Applied mechanics in science and engineering, Appl. Mech. Rev. 51, 141–153.
Mathieu  É (1869), Mémoire sur l’équation aux différences partielles du quatrième ordre ΔΔu=0, et sur l’équilibre d’élasticité d’un corps solide, J. Math. Pures Appl. (ser 2) 14, 378–421.
Sommerfeld A (1900), Randwertaufgaben in der Theorie der partiellen Differentialgleichungen, Encyklopädie der Mathematischen Wissenschaften, H Burkhardt, W Wirtinger and R Fricke (eds), Teubner, Leipzig II/1 , 505–571.
Sommerfeld A (1964), Mechanics of Deformable Bodies, Academic Press, New York.
Kirchhoff G (1876), Vorlesungen über mathematische Physik, Band 1, Mechanik, Teubner, Leipzig.
Föppl A (1907), Vorlesungen über Technische Mechanik, Band 5, Die wichtigsten Lehren der höheren Elastizitätslehre, Teubner, Leipzig.
Kármán Th von (1910), Festigkeitsprobleme in Maschinenbau, Encyklopädie der Mathematischen Wissenschaften, F Klein and C Müller (eds), Teubner, Leipzig, IV/4 , 314–386.
Lamé G (1852), Leçons sur la théorie mathématique de l’élasticité des corps solids, Bachelier, Paris.
de Saint-Venant  B (1856), Mémoire sur la torsion des prismes, avec des considérations sur leur flexion, ainsi que sur l’équilibre intérier des solides élastiques en général, et des formules pratiques pour le calcul de leur résistance à divers efforts s’exerçant simultanément, Mém. Savants Etr. 14, 233–560.
Rankine WJM (1858), A Manual of Applied Mechanics, Griffin, London.
Filon  LNG (1903), On an approximate solution for the bending of a beam of rectangular cross-section under any system of load, with special references to points of concentrated or discontinuous loading, Philos. Trans. R. Soc. London, Ser. A 201, 63–155.
Filon  LNG (1937), On the relation between corresponding problems in plane stress and in generalized plane stress, Q. J. Math. 1, 289–299.
Langlois L (1964), Slow Viscous Flow, Macmillan, New York.
Stokes  GG (1902), On the effect of the internal friction of fluids on the motion of pendulums, Trans. Cambridge Philos. Soc. 9, 8–106.(Reprinted in Stokes GG (1922), Mathematical and Physical Papers, J Larmor (ed), Cambridge Univ Press, Cambridge, 3 , 1–141.)
Rayleigh  Lord, (1893), On the flow of viscous liquids, especially in two dimensions, Philos. Mag. (ser. 5) 36, 354–372.(Reprinted in Strutt JW, Baron Rayleigh (1903), Scientific Papers, Cambridge Univ Press, Cambridge, 5 , 78–93.)
Sommerfeld  A (1904), Zur hydrodynamischen Theorie der Schmiermittelreibung, Z. Math. Phys. 50, 97–155.
Lamb H (1906), Hydrodynamics, 3rd Edition, Cambridge Univ Press, Cambridge.
Klein  F and Wieghardt  K (1904), Über Spannungsflächen und reziproke Diagramme, mit bezonderer Berücksichting der MAXWELL schen Arbeiten, Arch. Math. Phys., (ser. 3) 8, 1–23, 95–97.
Trefftz  E (1924), ., Z. Angew. Math. Mech. 4, 359–360.
Wieghardt K (1908), Über ein neues Verfahren, verwickelte Spannungsverteilungen in elastischen Körpen auf experimentellem Wege zu finden. (Dissertation), Teubner, Berlin. (Also in Forschung Gebiete Ingenieurwesens B49 , 15–30.)
Wieghardt  K (1905), Über ein Verfahren, verwickelte theoretische Spannungsverteilungen auf experimentellem Wege zu finden, Z. Ver. Deuts. Ing. 49, 1568–1569.
Hencky  H (1922), Die numerische Bearbeitung von partiellen Differentialgleichungen in der Technik, Z. Angew. Math. Mech. 2, 58–66.
Dean  WR (1932), Slow motion of fluids, Philos. Mag. 13, 585–600.
Goodier  JN (1934), An analogy between the slow motion of a viscous fluid in two dimensions, and systems of plane stress, Philos. Mag. (ser. 7)17, 554–576.
Goodier  JN (1934), Additional note on an analogy between the slow motion of a viscous fluid in two dimensions and systems of plane stress, Philos. Mag. (ser. 7)17, 800–803.
Goodier  JN (1936), Slow viscous flow and elastic deformations, Philos. Mag. (ser. 7) 22, 678–681.
Cranz  H (1939), Die experimentelle Bestimmung der Airyschen Spannungsfunction mit Hilfe der Plattengleichnisses, Ing.-Arch. 10, 159–166.
Hetényi  M (1941), On the similarities between stress and flow patterns, J. Appl. Phys. 12, 592–595.
Southwell  RV (1950), On the analogues relating flexure and extension of flat plates, Q. J. Mech. Appl. Math. 3, 257–270.
Ryan  JJ (1952), The plate analogy as a means of stress analysis, Proc. Soc. Exp. Stress Anal. 10(1), 7–28.
Hill  R (1955), On related pairs of plane elastic states, J. Mech. Phys. Solids 4, 1–9.
Southwell  RV (1958), Use of an analogue to resolve Stokes’s paradox, Nature (London) 181, 1257–1258.
Richards  TH (1960), Analogy between the slow motion of a viscous fluid and the extension and flexure of plates: a geometric demonstration by means of moiré fringes, British J. Appl. Phys. 11, 244–253.
Chladni EFF (1817), Neue Beiträge zur Akustik, Breitkopf and Härtel, Leipzig.
Lagrange  JL (1828), Note communiquée aux Commissaires pour le prix de la surface élastique (décembre 1811), Ann. Chimie Physique, (ser 2) 39, 149, 207.
Germain S (1821), Recherches sur la théorie des surfaces élastiques, Hurard-Courcier, Paris.
Germain  S (1828), Examen des principes qui peuvent conduire à la connaissance des lois de l’équilibre et du mouvement des solides élastiques, Ann. Chimie Physique, (ser 2) 38, 123–131. 38, 150.
Truesdell  C (1991), Sophie Germain fame earned by stubborn error, Boll. Storia Sci. Mat. 11(2), 3–24.
Bucciarelli LL and Dworsky N (1980), Sophie Germain: An Essay in the History of the Theory of Elasticity, Reidel, Dordrecht.
Kramer EE (1972), Germain, Sophie, Dictionary Scientific Biography, CC Gillispie (ed), Scribner, New York, V , 375–376.
Szabó  G (1972), Die Geschichte der Plattentheorie, Bautechnik 49, 1–8.
Dalmédico  AD (1987), Méchanique et théorie des surfaces:les travaux de Sophie Germain, Hist. Math. 14, 347–365.
Dalmédico  AD (1991), Sophie Germain, Sci. Am. 265(6), 76–81.
Szabó G (1977), Geschichte der mechanischen Prinzipien und ihrer wichtingsten Anwendungen, Birkhäuser, Basel.
Airy  GB (1863), On the strains in the interior of beams, Philos. Trans. R. Soc. London, Ser. A 153, 49–79.
Airy  GB (1862), On the strains in the interior of beams, Proc. R. Soc. London 12, 304–306.
Airy  GB (1862), On the strains in the interior of beams, Rep. British Assoc. Adv. Sci. 32, 82–86.
Maxwell JC (1862), Report on a paper by George Biddel Airy on stress in beams, The Scientific Letters and Papers of James Clerk Maxwell (1995), PM Harman (ed), Cambridge Univ Press, Cambridge, 2 , 62–69.
Maxwell JC (1862), Letter to George Gabriel Stokes, 29 December 1862, The Scientific Letters and Papers of James Clerk Maxwell (1995), PM Harman (ed), Cambridge Univ Press, Cambridge, 2 , 70–71.
Maxwell JC (1863), Letter to George Gabriel Stokes, 9 June 1863, The Scientific Letters and Papers of James Clerk Maxwell (1995), PM Harman (ed), Cambridge Univ Press, Cambridge, 2 , 412–415.
Maxwell  JC (1868), On reciprocal diagrams in space, and their relation to Airy’s function of stress, Proc. London Math. Soc. 2, 102–105.(Reprinted in Maxwell JC (1890), The Scientific Papers, WD Niven (ed), Cambridge Univ Press, Cambridge, 2 , 58–60.)
Maxwell  JC (1870), On reciprocal figures, frames, and diagrams of forces, Proc. R. Soc. Edinburgh 7, 53–56.(Reprinted in The Scientific Letters and Papers of James Clerk Maxwell (1995), PM Harman (ed), Cambridge Univ Press, Cambridge, 2 , 519–521.)
Maxwell  JC (1870), On reciprocal figures, frames, and diagrams of forces, Trans. Roy. Soc. Edinburgh 26, 1–40. (Reprinted in Maxwell JC (1890), The Scientific Papers, WD Niven (ed), Cambridge Univ Press, Cambridge, 2 , 161–207.)
Lévy  M (1898), Sur la légitimité de la régle dite du trapèze dans l’étude de la resistance des barrages en maçonnerie, C.R. Acad. Sci. Paris 126, 1235–1240.
Michell  JH (1899), On the direct determination of stress in an elastic solid, with application to the theory of plates, Proc. London Math. Soc. 31, 100–121.
Ibbetson WJ (1887), An Elementary Treatise on the Mathematical Theory of Perfectly Elastic Solids, with a Short Account of Viscous Fluids, Macmillan, London.
Michell  JH (1901), Elementary distributions of plane stress, Proc. London Math. Soc. 32, 35–61.
Michell  JN (1902), The inversion of plane stress, Proc. London Math. Soc. 34, 134–142.
Venske  O (1891), Zur Integration der Gleichung ΔΔu=0 für ebene Bereiche, Nachr. K. Ges. Wiss. Göttingen 1, 27–34.
Timpe A (1904), Probleme der spannungsverteilung in ebenen Systemen, einfach, gelöst mit Hilfe der AIRY schen Funktion (Dissertation), Teubner, Leipzig.
Sommerfeld  A (1906), Über die Knicksicherheit der Stege von Walzwerkprofilen, Z. Math. Phys. 54, 113–153.
Sommerfeld  A (1906), Nachtrag und Berichtigung zu der Abhandlung: Über die Knicksicherheit der Stege von Walzwerkprofilen, Z. Math. Phys. 54, 318–324.
Grüning M (1912), Allgemeine Theorie des Fachwerks und der vollwandigen Systeme, Encyklopädie der Mathematischen Wissenschaften, F Klein and C Müller (eds), Teubner, Leipzig, IV/4 , 421–537.
Almansi  E (1896), Sull’integrazione dell’equazione differenziale Δ2Δ2=0,Atti. Reale. Accad. Sci. Torino 31, 881–888.
Almansi  E (1898), Sull’integrazione dell’equazione differenziale Δ2n=0,Ann. Mat. Pura. Appl., (ser 3) 2, 1–51.
Boggio  T (1900), Integrazione dell’equazione Δ2Δ2=0 in una corona circolare e in uno strato sferico, Atti. Reale. Ist. Veneto 59, 497–508.
Boggio  T (1901), Integrazione dell’equazione Δ2Δ2=0 in un’area ellittica, Atti. Reale. Ist. Veneto 60, 591–609.
Boggio  T (1905), Sulle funzioni di Green d’ordine m,Rend. Circ. Mat. Palermo 20, 97–135.
Boggio  T (1957), Sopra un teorema di Almansi relativo al problemo biarmonico, Boll. Un. Mat. Ital., (ser. 3) 12, 369–376. (English review in Math Revs 19, 1046.)
Levi-Cevita  T (1898), Sulla integrazione dell’equazione Δ2Δ2u=0,Atti. Reale. Accad. Sci. Torino 33, 932–956.
Levi-Cevita T (1898), Sopra una transformazione in sèstessa della equazioneΔ2Δ2u=0, Ferrari, Venezia.
Lauricella  G (1896), Integrazione dell’equazione Δ22u)=0 in un campo di forma circolare, Atti. Reale. Accad. Sci. Torino 31, 1010–1018.
Volterra  V (1896), Osservazioni sulla Nota precedente del Prof. Lauricella e sopra una Nota di analogo argomento dell’Ing. Almansi, Atti. Reale. Accad. Sci. Torino 31, 1018–1021.
Rothe E (1925), Die Gleichung ΔΔu=0 und anschliessende Probleme, Die Differential -und Integralgleichungen der Mechanik und Physik, P Frank and R von Mises (eds), Vieweg, Braunschweig, 1 , 845–860.
Miranda C (1955), Equazioni alle derivate parziali di tipo ellitico, Julius Springer-Verlag, Berlin.
Miranda C (1970), Partial Differential Equations of Elliptic Type, 2nd edition, Julius Springer-Verlag, Berlin.
Sologub VS (1975), Development of the Theory of Elliptical Equations in XVIII and XIX Centuries (in Russian), Naukova Dumka, Kiev.
Mathieu  E (1880), Sur l’équilibre d’élasticité d’un prisme rectangle, C.R. Acad. Sci. Paris 90, 1272–1274.
Mathieu  É (1881), Mémoire sur l’équilibre d’élasticité d’un prisme rectangle, J. Ec. Polytech. (Paris) 30, 173–196.
Mathieu E (1890), Théorie de l’élasticité des corps solides, Gauthier-Villars, Paris.
Goursat  É (1898), Sur l’équation ΔΔu=0,Bull. Soc. Math. France 26, 236–237.
Mesnager  A (1901), Sur l’application de la théorie de l’élasticite en calcul des pieses rectangulaires flechies, C.R. Acad. Sci. Paris 132, 1475–1478.
Mesnager  A (1901), Contribution a l’étude de la déformation élastique des solides, Ann. Ponts. Chaussées, (ser. 8) 18, 129–190.
Abramov NM (1908), Airy function and its application for solution of problems in the theory of elasticity in works of Klein and Wieghardt, and Timpe, (dissertation), Venike, St Petersburg, (in Russian).
Kolosov G (1910), One application of the theory of functions of complex variables to a plane problem of the theory of elasticity, (dissertation), Matissen, Yur’ev in Russian). (German review in Jbuch. Fortschr. Math. 41, 889–890.)
Gersevanov  N (1910), A general method of study of the elastic equilibrium of a plane isotropic solid and a thin plate bounded by two curved lines (in Russian), Sbornik St-Petersburg Inst Inzh Putei Soobshch 76(4), 1–48.
Krutkov YuA (1949), Tensor of Stress Functions and General Solutions in Statical Theory of Elasticity (in Russian), Izd Akad Nauk SSSR, Moscow.
Golovin  Kh (1881), One problem in statics of an elastic body (in Russian), Izvestiya St. Peterburg Prakt. Tekhnol. Inst. 3, 373–410.
Boussinesq J (1885), Application des potentiels à l’étude de l’équilibre et du mouvement des solides élastiques, principalement au calcul des déformations et des pressions que produisent, dans ces solides, des effort quelconques exercés sur une petite partie de leur surface ou de leur interieur, Gautiers-Villars, Paris.
Volterra V (1914), Drei Vorlesungen über neure Forschritte der mathematischen Physik Teubner, Leipzig.
Rademacher H and Rothe E (1925), Einige besondere Probleme partieller Differentialgleichungen, Die Differential—und Integralgleichungen der Mechanik und Physik, P Frank and R von Mises (eds), Vieweg, Braunschweig 1 , 631–645.
Nicolesco M (1936), Les fonctions polyharmoniques, Hermann, Paris.
Zweiling K (1952), Biharmonische Polynome, Julius Springer-Verlag, Berlin.
Worch G (1956), Elastische Scheiben, Beton-Kalender, Ernst, Berlin, 2 , 31–120.
Walter  PA (1931), Comments on the paper “On the friction of a lubricant between a journal and its bearing,” by NE Joukovkii and SA Chaplygin, Trudy. Central Aero-Gidrodinam Inst. 95, 138–153. Reprinted in Joukovskii NE (1937), Collected papers (in Russian), AP Kotelnikov (ed) ONTI NKTP, Moscow-Leningrad, IV , 299–317.
Papkovich  PF (1937), A derivation the main formulae of the plain problem of the theory of elasticity from the general integral of the Lamé equations (in Russian), Prikl. Mat. Mekh. 1, 147–154.
Clebsch A (1862), Theorie der Elasticität der fester Körper, Teubner, Leipzig.
Timpe  A (1905), Probleme der Spannungsverteilung in ebenen Systemen, einfach gelöst mit Hilfe der AIRY schen Funktion, Z. Math. Phys. 52, 348–383.
Mann  EH (1949), An elastic theory of dislocations, Proc. R. Soc. London, Ser. A 199, 376–394.
Sadeh  WZ (1967), A note on the general solution of the two-dimensional linear elasticity problem in polar coordinates, AIAA J 5, 354.
Bert  CW (1968), Comments on “A note on the general solution of the two-dimensional linear elasticity problem in polar coordinates,” AIAA J 6, 568.
Hyman  BI (1968), Comments on “A note on the general solution of the two-dimensional linear elasticity problem in polar coordinates,” AIAA J 6, 568–569.
Wan  FYM (1968), Comments on “A note on the general solution of the two-dimensional linear elasticity problem in polar coordinates,” AIAA J 6, 569.
Sonntag  R (1930), Über ein Problem der aufgeschmitten Kreisringplatte, Ing-Arch 1, 333–349.
Floquet  G (1891), Notice sur É Mathieu, sa vie et ses travaux, Bull. Soc. Sci. Nancy (ser. 2) 11, 1–34.
Duhem  P (1892), Émile Mathieu, his life and works, Bull. New York Math. Soc. 1, 156–168.
Grattan-Guinnes I (1974), Mathieu, Émile-Léonard, Dictionary Scientific Biography, CC Gillispie (ed), Scribner, New York, IX , 174–175.
Koialovich BM (1902), On one partial differential equation of the fourth order (in Russian) (Doctoral dissertation), Izd St Petersburg Univ, St Petersburg, (German review in Jbuch Fortschr Math 33, 367–368.)
Koialovich BM (1901), On one generalization of Green’s formula (in Russian), Dnevnik XI Congr. Russ. Natl. Sci. Phys. 616–617.
Koialovich BM (1901), On a question on the uniqueness of some solutions of linear differential equations (in Russian), Dnevnik XI Congr. Russ. Natl. Sci. Phys. 617.
Bobylev  D, Korkin  A, Markov  A, and Ptashickii  I (1903), Report on the doctoral dissertation BM Koialovich “On one partial differential equation of the fourth order (in Russian),” Zhurnal Soveta Imp. St. Petersburg Univ. 59, 38–40.
Sen  B (1933), On the uniqueness of solution of problems of elasticity connected with bending of thin plates under normal pressures, Philos. Mag. (ser. 7)16, 975–979.
Bremekamp H (1942), Sur l’existence et la construction des solutions de certaines équations aux dérivées partielles du quatrième ordre, Nederl. Akad. Wetensch. Proc.45 , 675–680 (Also in Indagationes Math. 4, 252–257.)
Bremekamp H (1946), Over het bestaan der oplossing van Δuk=0, die met haar k−1 eerste normale afgeleiden gegeven waarden aanneemt in de punten van een gegeven gesloten kromme, I, II, III, Nederl. Akad. Wetensch. Proc.49 , 185–193, 302–311. (Also in Indagationes Math. 8, 82–90, 171–187.)
Bremekamp H (1946), Over de oplossingen der vergelijkig ΔΔu=0, die aan zekere randvoorwaarden voldoen, Nederl. Akad. Wetensch. Proc.49 , 319–330. (Also in Indagationes Math. 8, 188–199.)
Dean  WR (1953), The Green’s function of an elastic plate, Proc. Cambridge Philos. Soc. 49, 319–326.
Dean  WR (1954), Note on the Green’s function of an elastic plate, Proc. Cambridge Philos. Soc. 50, 623–627.
Dean  WR, and Harris  GZ (1954), The Green’s function of an elastic plate, Mathematika 1, 18–23.
Schultz-Grunow  F (1953), GREEN sche Funktionen für elastische Platten, Z. Angew. Math. Mech. 33, 227–237.
Lorentz  HA (1896), Eene algemeene stelling omtrent de beweging eener vloeistof met wrijving en eenige daaruit afgeleide gevolgen, Zit Konin Akad Wetensch Amsterdam 5, 168–175. (German translation: Ein allgemeiner Satz, die Bewegung einer reibenden Flüssigkeit betreffend, nebst einigen Anwendungen desselben, Lorentz HA (1907), Abhandlungen über theoretische Physik, 23–42, Teubner, Leipzig; English translation: A general theorem concerning the motion of a viscous fluid and a few consequences derived from it, Lorentz HA (1937), Collected Papers P Zeeman and AD Focker (eds), Nijhoff, the Hague, IV , 7–14; English translation: A general theorem on the motion of a fluid with friction and a few results derived from it, J. Eng. Math. 30, 19–24.)
Hancock  GJ (1953), The self-propulsion of microscopic organisms through liquids, Proc. R. Soc. London, Ser. A 217, 96–121.
Kuiken  HK (1996), HA Lorentz: Sketches of his work on slow viscous flow and some other areas in fluid mechanics and the background against which it arose, J. Eng. Math. 30, 1–18.
Muschelišvili [Muskhelishvili] N (1919), Sur l’intégration de l’équation biharmonique, Izvestiya Ros. Akad. Nauk. (ser. 7) 663–686.
Kolosov  G (1915), On conjugate differential equations in partial derivatives and their applications to resolving some problems of the mathematical physics (in Russian), Izvestiya. Petrograd. Elektrotech. Inst. 12, 55–67.
Chaplygin SA (1900), Deformation in two dimensions, Chaplygin SA (1950), Collected Works (in Russian), LS Leibenzon (ed), GITTL, Moscow-Leningrad, III , 306–316.
Kolossoff [Kolosov]  G (1908), Sur les problèmes d’élasticité à deux dimensions, C.R. Acad. Sci. Paris 146, 522–525.
Kolossoff [Kolosov]  G (1909), Sur les problèmes d’élasticité à deux dimensions, C.R. Acad. Sci. Paris 148, 1242–1244, 1706.
Muskhelishvili  NI (1938), Gurii Vasil’evich Kolosov, Obituary (in Russian), Usp. Mat. Nauk. 4, 279–281.
Ryago G (1955), On life and scientific activity of four prominent mathematicians of Tartu University (in Russian), Uchenye Zapiski Tartu Univ No 37, 74–103.
Depman  IYa (1963), The St Petersburg Mathematical Society (in Russian), Istor.-Mat. Issled. 13, 11–106.
Grigorian AT (1973), Kolosov, Gury Vasilevich, Dictionary Scientific Biography, CC Gillispie (ed), Scribner, New York, X , 453–454.
Grigolyuk EI (1987), Mathematical methods in the theory of elasticity, History of Mechanics in Russia (in Russian), AN Bogolyubov (ed), Naukova Dumka, Kiev, 348–353.
Ermolaeva  NS (1989), Doctoral thesis by GV Kolosov and its estimation by VA Steklov (in Russian), Istor.-Mat. Issled. 31, 52–75.
Kolossoff [Kolosov] G (1909), Sur le problème plan dans la théorie d’élasticité, Atti IV Congresso Internationale Matematici, G Castelunovo (ed), Academia Lincei, Rome, 3 , 187–190.
Kolosov G (1910), On application of the theory of functions of complex variable to the integration of hyperharmonical equation Δ2 Δ2u=0 under prescribed conditions at the contour, Dnevnik XII Congr. Russ. Natl. Sci. Phys. No. 4, 123, (in Russian). (German review in Jbuch Fortschr. Math. 38, 401.)
Kolosov G (1910), Plane problem of the mathematical theory of elasticity (in Russian), Dnevnik XII Congr. Russ. Natl. Sci. Phys. No. 10, 427–428. (German review in Jbuch Fortschr. Math. 41, 429.)
Fok  VA (1926), Sur la réduction du problème plan d’élasticité à une équation intégrale de Fredholm, C.R. Acad. Sci. Paris 182, 264–266.
Fok  VA (1927), Transformation of plane problem of the theory of elasticity to the Fredholm integral equation (in Russian), Zhurnal Ros. Fiz.-Khim. Obshch. 58(1), 11–20.
Kolosov  G (1913), On stress distribution in plates weakend by notches under tension, in connection with some properties of the plane problem of the mathematical theory of elasticity (in Russian), Mat. Sb. 29, 12–25.
Kolossoff [Kolosov]  G (1914), Über einige Eigenschaften des ebenen Problem der Elastizitätstheorie, Z. Math. Phys. 62, 384–409.
Kolosov  G (1931), Sur une application des formules de M Schwarz, de M Villat et de M Dini au problème d’élasticité, C.R. Acad. Sci. Paris 193, 389–391.
Kolosov  G and Muskhelov [Muskhelishvili]  N (1915), On equilibrium of elastic circular discs under surface loads acting in their plane (in Russian), Izvestiya. Petrograd. Elektrotech. Inst. 12, 39–55(German review in Jbuch. Fortschr. Math. 48, 1434–1435.)
Muskhelov [Muskhelishvili]  N (1916), On thermal stresses in the plane problem of the theory of elasticity (in Russian), Izvestiya. Petrograd. Elektrotech. Inst. 13, 23–37.
Muschelišvili [Muskhelishvili] N (1922), Application des intégrales analogues à celles de Cauchy à quelques problèmes de la Physique Mathématique (Doctoral dissertation), Izd Tiflis Univ, Tiflis.
Muschelišvili [Muskhelishvili]  NI (1931), Nouvelle méthode de réduction de problème biharmonique fondamental à une équation de Fredholm, C.R. Acad. Sci. Paris 192, 77–79.
Muschelišvili [Muskhelishvili]  NI (1931), Théorèmes d’existence relatifs au problème biharmonique et aux problèmes d’élasticité à deux dimensions, C.R. Acad. Sci. Paris 192, 221–223.
Muschelišvili [Muskhelishvili]  NI (1932), Recherches sur les problèmes aux limites relatifs àl’équation biharmonique et aux équations de l’élasticité à deux dimensions, Math. Ann. 107, 282–312.
Muschelišvili [Muskhelishvili]  NI (1934), A new general method of solution of the fundamental boundary problems of the plane theory of elasticity (in Russian, with French summary), Dokl. Akad. Nauk. SSSR 3(1), 7–11.
Muschelišvili [Muskhelishvili]  NI (1934), A study of the new integral equations of the plane theory of elasticity (in Russian, with French summary), Dokl. Akad. Nauk. SSSR 3(1), 73–77.
England AH (1971), Complex Variables Methods in Elasticity, John Wiley and Sons, London.
Stevenson  AC (1943), Some boundary problems of two-dimensional elasticity, Philos. Mag. (ser. 7)34, 766–793.
Stevenson  AC (1945), Complex potential in two-dimensional elasticity, Proc. R. Soc. London, Ser. A 184, 129–179, 218–229.
Poritsky  H (1946), Application of analytic functions to two-dimensional biharmonic analysis, Trans. Amer. Math. Soc. 59, 248–279.
Malkin  I (1964), Two dimensional elasticity and Muskhelishvili’s contribution to it, Scripta Math. 27, 49–53.
Mikhailov GK and Radok IRM (1993), On NI Muskhelishvili’s place in the world of science and mathematics, Continuum Mechanics and Related Problems of Analysis (Proc of Int Symp dedicated to the Centenary of Academician N Muskhelishvili, M Balavaradze, I Kiguradze, V Kokilashvili (eds), Metsniereba, Tbilisi, 67–74.
Fridman AA (1910), Letters to VA Steklov, Fridman AA (1966), Selected Works (in Russian), Nauka, Moscow, 332–333.
Gersevanov  NM (1933), General method of the theory of elasticity and its applications for determination of stresses in soils under prescribed loading on its surface, Osnov. Fund. 1, 12–39. (Reprinted in Gersevanov NM (1948), Collected Papers (in Russian), Stroivoenmorizdat, Moscow, 1 , 214–235.)
Gersevanov  NM (1927), On application of the theory of elasticity to foundations design, Trudy Moskov. Inst. Inzh. Transp. 6, 19–28. (Reprinted in Gersevanov NM (1948), Collected Papers (in Russian), Stroivoenmorizdat, Moscow, 1 , 205–213.)
Gersevanov  NM (1930), Study of distribution of stresses in fundaments on the basis of theory of elasticity, Trudy Moskov. Inst. Inzh. Transp. 15, 241–250. (Reprinted in Gersevanov NM (1948), Collected Papers (in Russian), Stroivoenmorizdat, Moscow, 1 , 261–268.)
Puzyrevskii NP (1923), Foundations Design (in Russian), Stroiizdat, Moscow.
Sobrero L (1934), Theorie der ebenen Elastizität unter Benutzung eines System hyperkomplexer Zahlen, Teubner, Leipzig.
Schmidt  K (1951), Behandlung ebener Elastizitätsprobleme mit Hilfe hyperkomplexen Singularitäten, Ing.-Arch. 19, 324–341.
Stahl  K (1954), Über die Lösung ebener Elastizitätsaufgaben in komplexer und hyperkomplexen Darstellung, Ing.-Arch. 22, 1–20.
Krylov  AN (1948), A report on the Professor Papkovich’s treatese “Structural Mechanics of a Ship,” Morskoi Sbornik 10, 55–64. (Reprinted in Krylov AN (1956), Recollections and Essays (in Russian), IS Isakov (ed), Izd Akad Nauk SSSR, Moscow, 475–487.)
Picard  É (1894), l’Équilibre de plaques encastrées, Intermédiare Math. 1, 27.
Flamant A (1886), Résistance des matériaux, Baudry, Paris.
Painlevé  P (1907), Rapport sur le Mémoire de M J Hadamard, C.R. Acad. Sci. Paris 145, 984–986.
Picard  É (1907), Report sur le Mémoire de M Lauricella et le Mémoire n°3, portant pour épigraphe: “Rien n’est beau que le vrai, le viai seul est aimable,” C.R. Acad. Sci. Paris 145, 986–988.
Poincaré  H (1907), Rapport sur le Mémoire de M Boggio et le Mémoire n°7, portant pour épigraph “Barré de Saint-Venant,” C.R. Acad. Sci. Paris 145, 988–991.
Hadamard  J (1907), Mémoire sur le problème d’analyse relatif à l’équilibre des plaques élastiques encastrées, Mém. Savants Étrang. (ser. 2) 33(4), 1–128. (Reprinted in Hadamard J (1968), Oeuvres, CNRS, Paris, 2 , 515–641.)
Korn  A (1908), Sur l’équilibre des plaques élastiques encastrées, Ann. Sci. Ecole Norm. Sup. (ser. 3) 25, 529–583.
Lauricella  G (1906), Sull’integrazione delle equazione dell’equilibrio dei corpi elastici isotropi, Rend. Reale. Accad. Lincei. 15, 426–432.
Lauricella  G (1907), Sulla integrazione dell’equazione Δ22V)=0,Rend. Reale. Accad. Lincei. 16, 373–383.
Lauricella  G (1909), Sur l’intégration de l’équation relative à l’équilibre des plaques élastiques encastrées, Acta. Math. 32, 201–256.
Zaremba S (1908), Sur l’intégration de l’équation biharmonique, Bull. Acad. Sci. Cracovie. 1–29.
Zaremba  S (1909), Problème biharmonique restreint, Ann. Sci. Ecole Norm. Sup. 26, 337–404.
Maz’ya V and Shaposhnikova T (1998), Jacques Hadamard, a Universal Mathematician, Am Math Soc, Providence.
Hadamard J (1908), Sur certain cas intéressants du problème biharmonique, Atti IV Congresso Internationale Matematici, G Castelnuovo (ed), Acad Lincei, Rome, 2 , 12–14. (Reprinted in Hadamard J (1968), Oeuvres, CNRS, Paris, 3 , 1297–1299.)
Englis̆  M and Peetre  J (1995), Green’s function for the annulus, Ann. Math. 171, 313–377.
Garabedyan  PR (1951), A partial differential equation arising in conformal mapping, Pacific J Math 1, 485–524.
Shapiro  HS and Tegmark  M (1994), An elementary proof that the biharmonic Green function of an eccentric ellipse changes sign, SIAM Rev. 36, 99–101.
Szegö G (1950), On membranes and plates, Proc. Nat. Acad. Sci. USA, 36 , 210–216.
Loewner  C (1953), On generation of solution of biharmonic equations in the plane by conformal mapping, Pacific J. Math. 3, 417–436.
Duffin  RJ (1949), On a question of Hadamard concerning superharmonic functions, J. Math. Phys. 27, 253–258.
Hedenmalm  PJH (1994), A computation of Green functions for the weighted biharmonic operators Δ|z|−2αΔ with α>−1,Duke Math. J. 75, 51–78.
Sherman  DI (1940), On the solution of a plane static problem of the theory of elasticity under prescribed forces (in Russian), Dokl. Akad. Nauk. SSSR 28, 25–28.
Schröder  K (1943), Zur Theorie der Randwertaufgaben der Differentialgleichung ΔΔU=0,Math. Z. 48, 553–675.
Schröder  K (1943), Über die Ableitungen biharmonischer Funktionen am Rande, Math. Z. 49, 110–147.
Schröder  K (1949), Das problem der eingespannten rechteckigen elastische Platte. I, Die biharmonische Randwertaufgabe für das Rechteck, Math. Ann. 121, 247–326.
Haar A (1907), Die Randwertaufgabe der Differential-gleichung ΔΔU=0,Nachr. K. Ges. Wiss. Göttingen, Math.-Phys. Kl 280–287. (Reprinted in Haar A (1959), Gesammelte Arbeiten, B Szokefalvi-Nagy (ed) Akadémiai Kiadó, Budapest, 215–222.)
Fueter  R (1909), Dr. Walter Ritz, Schweiz. Naturforsch. Ges. 92, 96–104.
Krylov A and Lazarev P (1928), A note on the scientific papers by NM Kryloff (in Russian), Izvestiya. Ros. Akad. Nauk. (ser. 7), 610–612.
Forman P (1975), Ritz, Walter, Dictionary Scientific Biography, CC Gillispie (ed), Scribner, New York, XI , 475–481.
Poisson  SD (1829), Mémoire sur l’équilibre et le mouvement des corps élastiques, Mém. Acad. Roy. Sci. Inst. France 8, 357–570.
Woinowsky-Krieger  S (1953), Über die Biegung von Platten durch Einzellasten mit recteckiger Aufstandsfläche, Ing.-Arch. 21, 331–338.
Föppl  A (1912), Die Biegung einer kreisförmigen Platte, S-B. Math.-Phys. Kl. K. Akad. Wiss. München 42, 155–190.
Melan  E (1920), Die Berechnung einer exzentrisch durch eine Einzellast belasteten kreisplatte, Eisenbau 17, 190–194.
Flügge W (1928), Die strenge Berechnung von Kreisplatten unter Einzellasten, (dissertation), Julius Springer-Verlag, Berlin.
Müller  W (1943), Die Durchbiegung einer Kreisplatte unter exzentrisch angeordneten Lasten, Ing.-Arch. 13, 355–376.
Timoshenko  SP (1907), An influence of circular openings on the stress distribution in plates (in Russian, with French summary), Izvestiya Kiev Politekh. Inst. 7(3), 95–113. (Reprinted in Timoshenko SP (1975), Strength and Vibrations of Structural Elements (in Russian), EI Grigolyuk (ed), Nauka, Moscow, 106–123).
Timoshenko  SP (1909), On the distribution of the stresses in a circular ring compressed by two forces acting along a diameter (in Russian) with French summary), Izvestiya Kiev Politekh. Inst. 9(1), 21–37. (Reprinted in Timoshenko SP (1975), Strength and Vibrations of Structural Elements (in Russian), EI Grigolyuk (ed), Nauka, Moscow, 124–138.)
Timoshenko  SP (1922), On the distribution of stresses in a circular ring compressed by two forces acting along diameter, Philos. Mag. (ser. 6) 44, 1014–1019, (Reprinted in Timoshenko SP (1953), The Collected Papers (in Russian), McGraw-Hill, New York, 334–337.)
Wieghardt  K (1915), Über einige wirklich durchfürbare Ansätze zur Berechnung von Spannungszuständen des elastischen Kreisringes, S-B. Akad. Wiss. Wien. Mat.-Nat. Kl. 124, 1119–1129.
Filon LNG (1924), The stresses in a circular ring, Instn. Civil Engrs. Selected Papers, No. 12.
Köhl  E (1929), Berechnung von kreisrunden Scheiben unter der Wirkung von Einzelkräften in ihre Ebene, Ing.-Arch. 1, 211–222.
Hertz  HR (1883), Über die Verteilung der Druckkräfte in einem elastischen Kreiszylinder, Z. Math. Phys. 28, 125–128.(Reprinted in Hertz H (1895), Gessammelte Werke, PH Lenard (ed), Barth, Leipzig, 1 , 283–287.)
Bryan  GH (1894), On the theory of thin plating, and its applicability to calculations of the strength of bulkhead plating and similar structures, Trans. Inst. Naval Arch. 35, 113–125.
Leibenzon  LS (1916), On the theory of plates lying on the point supports, Trudy Otd Fiz Nauk Imper Obshch Lyubit Estest Antrop Etnog 18(1), 1–48. (Reprinted in Leibenzon LS (1951), The Collected Papers (in Russian), AI Nekrasov (ed), Izd Akad Nauk SSSR, Moscow, 1 , 100–148.)
Bremekamp  H (1948), Construction of the solution of ΔΔu=0, satisfying given boundary conditions, in the case that the boundary is an ellipse, Nieuw Arch. Wiskunde 22, 300–305.
Nash  WA (1950), Bending of an elliptic plate by edge loading, ASME J. Appl. Mech. 17, 448–453.
Perry  CL (1951), “Bending of an elliptic plate by edge loading”-A discussion, ASME J. Appl. Mech. 18, 227–228.
Tedone  O (1906), Sui problemi di equilibrio elastico a qui dimensioni-Ellisse, Atti. Reale. Accad. Sci. Torino 41, 86–101.
Muskhelishvili  NI (1933c), A solution of the plane problem of elasticity for a complete ellipse (in Russian), Prikl. Mat. Mekh. 1, 5–16.
Sherman  DI (1941), On stresses in an elliptic plate (in Russian), Dokl. Akad. Nauk. SSSR 31, 309–310.
Belzeckii  S (1907), One problem of the theory of elasticity which can be easily solved in elliptic coordinates (in Russian), Izvestiya. Sobr. Inzh. Putei. Soobshch. 27, 169–172.
Timpe  A (1923), Die AIRY ssche Funktion für den Ellipsenring, Math. Z. 17, 189–205.
Sheremet’ev  MP (1953), An elastic equilibrium of an elliptic ring (in Russian), Prikl. Mat. Mekh. 17, 107–113.
Grübler  M (1897), Der Spannungszustand in Schleifsteinen und Schmirgelscheiben, Z. Ver. Deuts. Ing. 41, 860–864.
Stodola A (1924), Dampf-und Gas-Turbinen, 6th Edition, Julius Springer-Verlag, Berlin.
Stodola A (1945), Steam and Gas Turbines, Smith, New York.
Neuber H (1937), Kerbspannungslehre, Julius Springer-Verlag, Berlin.
Biezeno CB (1948), Survey of papers on elasticity published in Holland 1940–1946, Advances in Appled Mechanics, R von Mises and Th von Kármán (eds) Academic Press, New York, 1 , 105–170.
Timoshenko  S (1954), Stress concentration in the history of strength of materials, Proc Soc Exp Stress Anal 12(1), 1–12.(Reprinted in Timoshenko SP (1975), Strength and Vibrations of Structural Elements (in Russian), EI Grigolyuk (ed), Nauka, Moscow, 660–677.)
Sternberg  E (1958), Three-dimensional stress concentrations in the theory of elasticity, Appl. Mech. Rev. 11, 1–4.
Neuber  H and Hahn  HG (1966), Stress concentration in scientific research and engineering, Appl. Mech. Rev. 19, 187–199.
Freytag  F (1901), Gustav Kirsch, Z. Ver. Deuts. Ing. 45, 217–218.
Suyehiro  K (1914), The distribution of stress in a tension strip having a circular hole filed with a plug, Engineering 98, 231–232.
Föppl  L (1921), Einfluss von Löchern und Nuten auf die Beanspruchung von Wellen, Z. Ver. Deuts. Ing. 65, 497–498.
Kirsch  G (1898), Die Theorie der Elastizität und die Bedürfnisse der Festigkeitslehre, Z. Ver. Deuts. Ing. 42, 797–807.
Howland  RCJ (1930), On the stresses in the neighborhood of a circular hole in a strip under tension, Philos. Trans. R. Soc. London, Ser. A 229, 49–86.
Morley JM (1916), Strength of Materials, 4th Edition, Longmans, Green and Co, London.
Föppl A (1897), Vorlesungen über technische Mechanik, Band 3: Festigkeitslehre, Teubner, Leipzig.
Velikhov P (1907), Influence of openings on the stress distribution in a strip under tension, Izvestiya Moskov. Inzh. Uchil. Part II(1) 11–91.
Timoshenko  SP (1921), Proračunavanje tankikh ploča, oslabljenih otvorima, Tehn. List Udruž. Jugoslov Inž. Arhit. Zagreb. 3(4), 37–40. (Reprinted in Timoshenko SP (1975), Statical and Dynamical Problems of the Theory of Elasticity (in Russian), EI Grigolyuk (ed), Naukova Dumka, Kiev, 48–52.)
Timoshenko  SP (1924), On stresses in a plate with a circular hole, J. Franklin Inst. 197, 505–516.(Reprinted in Timoshenko SP (1953), The Collected Papers, McGraw-Hill, New York, 385–392.)
Timoshenko SP (1927), Stress concentration produced by fillets and holes, Verhand des zweiten International Kongress für technische Mechanik, Füssli, Zürich, 419–426. (Reprinted in Timoshenko SP (1953), The Collected Papers, McGraw-Hill, New York, 436–447.)
Suyehiro  K (1911), The distribution of stress in plates having discontinuities, and some problems connected with it, Engineering 92, 280–282.
Leon A (1906), Spannungen und Formänderungen einer um einen ihrer Durchmesser gleichmäßig sich drehenden Kreisscheibe, Fromme, Wien.
Leon  A (1908), Über die Störungen der Spannungsverteilung, die in elastischen Körpern durch Bohrungen und Bläschen entstehen, Österrich. Wochenschröffent. Baudienst 14, 163–168.
Leon  A (1909), Über die Störungen der Spannungsverteilung in Verbundkörpern, Österreich. Wochenschröffent Baudienst. 15, 19–24, 32–38.
Leon  A (1918), Ueber technische Anpassungen in der Natur, Z. Ver. Deuts. Ing. 62, 341–346, 368–371, 391–396.
Leon  A and Willheim  F (1912), Über die Zerstörung in tunnelartig gelochten Gesteinen, Österreich. Wochenschröffent Baudienst. 18, 281–285.
Leon  A and Zidlicky  R (1915), Die Ausnutzung des Materiales in gelochten Körper, Z. Ver. Deuts. Ing. 59, 11–16.
Preuss  E (1912), Versuhe über die Spannungsverteilung in gelochten Zugstäben, Z. Ver. Deuts. Ing. 56, 1780–1783.
Coker  EG (1911), The determination, by Photo-Elastic methods, of the distribution of stress in plates of variable section, with some applications to ship’s plating, Trans. Inst. Naval Arch. 53, 265–281. (Also in Engineering 91 , 514–516, 531–533, 566–568.)
Coker  EG (1912), The effects of holes and semi-circular notches on distribution of stress in tension members, Proc. Phys. Soc., London, Sect. A 25, 95–105.
Coker  EG (1913), The distribution of stress due to a rivet in a plate, Engineering 95, 413–414.
Coker  EG (1914), Stress distribution in materials, Rep. British Assoc. Adv. Sci. 84, 490–499. (Also in Engineering 98 , 261–263.)
Coker  EG (1921), Tension tests of materials, Engineering 111, 1–4.
Coker EG (1925), Some engineering problems of stress distribution, Proc of 1st Int Congress for Applied Mechanics, CB Biezeno and JM Burgers (eds), Waltman, Delft, 18–38.
Coker  EG (1928), Stresses in the hulls of stranded vessels, Trans. Inst. Naval Arch. 70, 144–151. (Also in Engineering 125 , 427–428.)
Coker  EG and Scoble  WA (1913), The distribution of stress due to a rivet in a plate, Trans. Inst. Naval Arch. 55, 207–218. (Also in Engineering 95 , 414–415.)
Coker  EG, Chakko  KC, and Satake  Y (1919), Photoelastic and strain measurements of the effects of circular holes on the distribution of stress in tension members, Proc. Inst. Eng. Shipbuilding Scotland 63, 34–94.
Coker  EG, and Kimball  AL (1920), The effects of holes, cracks and other discontinuities in ship’s platings, Trans. Inst. Naval Arch. 62, 117–123. (Also in Engineering 109, 840–842.)
Coker  EG and Heymans  P (1921), Stress concentrations due to notches and like discontinuities, Rep. British Assoc. Adv. Sci. 91, 291–299.
Coker  EG and Coleman  GP (1930), Stress distributions in notched beams and their applications, Trans. Inst. Naval Arch. 72, 141–153.
Timoshenko SP (1963), Reminiscences (in Russian), Izd St Petersburg Politechn, Paris.
Timoshenko SP (1968), As I Remember, Van Nostrand, Princeton.
Timoshenko SP (1953), The Collected Papers, McGraw-Hill, New York.
Young D (1953), Stephen P Timoshenko: Biographical sketch, The Collected Papers of Stephan P Timoshenko, McGraw-Hill, New York, IX-XXIII.
Young  D (1972), Stephen P Timoshenko, 1878–1972, Appl. Mech. Rev. 25, 759–763.
Grigolyuk EI (1975), Stephen P Timoshenko and his wis works on mechanics of solids and structural mechanics. Timoshenko SP (1975), Statical and Dynamical Problems of the Theory of Elasticity (in Russian), EI Grigolyuk (ed), Naukova Dumka, Kiev, 515–558.
Pisarenko GS (1991), Stepan Prokof’evich Timoshenko (in Russian) Nauka, Moscow.
Timoshenko  SP and Dietz  WG (1925), Stress concentration produced by holes and fillets, Trans. ASME 47, 199–220.
Swain  GF (1925), “Stress concentration produced by holes and fillets”—Discussion, Trans. ASME 47, 231–234.
Swain GF (1924), Structural Engineering: Strength of Materials, McGraw-Hill, New York.
Timoshenko  SP (1925), “Stress concentration produced by holes and fillets”—Author’s closure, Trans. ASME 47, 234–237.
Swain GF (1928), Festigkeitslehre, Julius Springer-Verlag, Berlin.
Sinclair  GB, and Meda  G (2001), On some anomalies in Lamé’s solutions for elastic solids with holes, ASME J. Appl. Mech. 68, 132–134.
Muschelišvili [Muskhelishvili]  N (1927), Sur la solution du problème biharmonique pour l’aire extériuere à une ellipse, Math. Z. 26, 700–705.
Muschelišvili [Muskhelishvili]  N (1933), Praktische Lösung der fundamentalen Rand wertaufgaben der Elastizitätstheorie in der Ebene für einige Berandungsformen, Z. Angew. Math. Mech. 13, 264–282.
Föppl  L (1931), Konforme Abbildung ebener Spannungszustände, Z Angew. Math. Mech. 11, 81–92.
Baker  JF (1953), Charles Edward Inglis, Obit Notices Fellows Roy. Soc. London 8, 445–457.
Inglis  CE (1913), Stresses in a plate due to the presence of cracks and sharp corners, Trans. Inst. Naval Arch. 55, 219–230, 231–241 (discussion). (Also in Engineering 95, 415.)
Pöschl  Th (1921), Über eine partikuläre Lösung des biharmonischen Problemen für den Aussenraum der Ellipse, Math. Z. 11, 89–96.
Durelli  AJ and Murray  WM (1943), Stress distribution around an elliptical discontinuity in any two-dimensional, uniform and axial, system of combined stress, Proc. Soc. Exp. Stress Anal. 1, 19–45.
Gutman  SG (1939), Tunnel design: a halfplane with a circular hole under a uniform pressure (in Russian), Izvestiya NII Gidrotekhniki 25, 148–168.
Mindlin  RD (1940), Stress distribution around a hole tunnel, Trans. Am. Soc. Civ. Eng. 105, 1117–1153.
Mindlin  RD (1948), Stress distribution around a hole near the edge of a plate under tension, Proc. Soc. Exp. Stress Anal. 5(2), 56–68.
Krettner J (1941), Beitrag zum Problem der ebenen langsamen Strömung und des ebenen Spannungszustandes (dissertation), Oldenbourg, München.
Müller  W (1942), Ebene Spannungs-und Strömungsfelder mit zwei kreiszylindrischen Grenzen, Ing.-Arch. 13, 37–58.
Müller  W (1942), Beitrag zur Theorie der langsamen Drehung zweier exzentrischer Kreiszylinder in der zähen Flüssigkeit, Z. Angew. Math. Mech. 22, 177–189.
Howland  RCJ, and Knight  RC (1932), Slow rotation of a circular cylinder in a viscous fluid bounded by parallel walls, Proc. Cambridge Philos. Soc. 29, 277–287.
Petrov  N (1883), Friction in machines and an influence of lubrication on it, Inzh. Zh. 2771–140, 27, 227–279, 27, 377–436. . (Reprinted in Hydrodynamic Theory of Lubrication, LS Leibenzon (ed), GTTI, Moscow-Leningrad (1934), 11–245). (Reprinted in Petrov NP (1948), Hydrodynamical Theory of Lubrication (in Russian), LS Leibenzon (ed), Izd Akad Nauk SSSR, Moscow, 7–228.)
Reynolds  O (1886), On the theory of lubrication and its application to Mr. Beauchamp Tower’s experiments, Philos. Trans. R. Soc. London, Ser. A 177, 157–234.(Reprinted in Reynolds O (1901), Papers on Mechanical and Physical Subjects, Cambridge Univ Press, Cambridge, 2 , 228–310.)
Joukovskii  NE (1886), On the hydrodynamical theory of friction between well lubricated solid bodies (in Russian), Zhurnal Ros Fiz-Khim Obshch 18, 209–215. (Reprinted in Trudy Central. Aero-Gidrodinam. Inst. (1931), No 95, 87–92, 98–99 (English summary); Reprinted in Joukovskii NE (1937), Complete Oeuvres, AP Kotelnikov (ed), ONTI NKTP, Moscow-Leningrad, IV , 234–241, 249–250 (English summary).)
Dowson  D (1987), Osborne Reynolds Centenary (1886–1986), Proc. Inst. Mech. Eng., Part C: Mech. Eng. Sci. 201(C2), 75–96.
Petroff [Petrov]  N (1883), Frottement dans les machines, Zapiski. Imper. Acad. Nauk. (ser. VIII) 10(4), 1–84. (Reprinted in Petrov NP (1948), Hydrodynamical Theory of Lubrication, LS Leibenzon (ed), Izd Akad Nauk SSSR, Moscow, 361–479, (Russian translation).)
Hills  CP and Moffatt  HK (2000), Rotatory honing: a variant of the Taylor paint-scraper problem, J. Fluid. Mech. 418, 119–135.
Michell  AGM (1905), Die Schmierung ebener Flächen, Z. Math. Phys. 52, 107–120.
Joukovskii  NE, and Chaplygin  SA (1906), On the friction of the lubricant between a journal and its bearing (in Russian), Trudy Otd. Fiz. Nauk Imper. Obshch. Lyubit. Estest. Antrop. Etnog. 13(1), 24–33. (Reprinted in Trudy Central Aero-Gidrodinam Inst (1931)95, 123–138, 154–155 (English summary); Reprinted in Hydrodynamic Theory of Lubrication, LS Leibenzon (ed), GTTI, Moscow-Leningrad (1934), 499–522; Reprinted in Chaplygin SA (1933), Complete Oeuvres, AN Krylov (ed), Izd Akad Nauk SSSR, Leningrad, II , 91–106; Reprinted in Joukovskii NE (1937), Complete Oeuvres, AP Kotelnikov (ed), ONTI NKTP, Moscow-Leningrad, IV , 279–298, 318–319 (English summary); Reprinted in Joukovskii NE (1948), Selected Papers, LS Leibenzon (ed), Izd Akad Nauk SSSR, Moscow-Leningrad, I , 282–296; Reprinted in Petrov NP (1948), Hydrodynamic Theory of Lubrication, LS Leibenzon (ed), Izd Akad Nauk SSSR, Moscow-Leningrad, 483–505; Reprinted in Joukovskii NE (1949), Collected Papers, LS Leibenzon (ed), GITTL, Moscow-Leningrad, III , 133–151; Reprinted in Chaplygin SA (1950), Collected Works, LS Leibenzon (ed), GITTL, Moscow-Leningrad, III , 7–26; Reprinted in Chaplygin SA (1954), Selected Works on Mechanics and Mathematics, MV Keldysh (ed), GTTI, Moscow, 477–489; Reprinted in Chaplygin SA (1976), Selected Works, SA Khristianovich (ed), Nauka, Moscow, 289–304; German review in Jbuch. Fortschr. Math. 35, 766–768.)
Semenova NM, Koptelova NM, and Syuganova IV (1968), NE Joukovskii - A Bibliography of Scientific Works (in Russian), Izd TsCAGI, Moscow.
Mercalov N (1936), Hydrodynamical theory of lubrication, Technical Encyklopaedia (in Russian), LK Martens (ed), OGIZ RSFSR, Moscow, 24 , 819–855.
Krylov AN (1936), Some reminiscences about NE Joukovskii, Krylov AN (1956), Recollections and Essays (in Russian), IS Isakov (ed), Izd Akad Nauk SSSR, Moscow 336–342.
Joukovski  NE (1887), On the motion of a viscous fluid enclosed between two rotating excentrically disposed cylindrical surfaces (in Russian), Soob. Mat. Obshch. Khar’kov Univ. 7, 34–42. (Reprinted in Trudy Central Aero-Gidrodinam Inst. (1931)95, 100–109, 122 (English summary); Reprinted in Joukovskii NE (1937), Complete Oeuvres, AP Kotelnikov (ed), ONTI NKTP, Moscow-Leningrad, IV , 250–261, 277–278 (English summary).)
Chaplygin SA (1900), Extension of a plate with two equal circular holes, Chaplygin SA (1950), Collected Works (in Russian), LS Leibenzon (ed), GITTL, Moscow-Leningrad, III , 324–300.
Wannier  GH (1950), A contribution to the hydrodynamics of lubrication, Q. Appl. Math. 8, 1–32.
Ballal  BY and Rivlin  RS (1976), Flow of a Newtonian fluid between eccentric rotating cylinders: Inertial effects, Arch. Ration. Mech. Anal. 62, 237–294.
Aref  H and Balachandar  S (1986), Chaotic advection in a Stokes flow, Phys. Fluids 29, 3515–3521.
Chaiken  J, Chevray  R, Tabor  M, and Tan  QM (1986), Experimental study of Lagrangian turbulence in Stokes flow, Proc. R. Soc. London, Ser. A 408, 165–174.
Chaplygin SA and Arzhannikov NS (1933), On deformation of a tube bounded by two eccentric cylinders under constant pressure, Trudy Central Aero-Gidrodinam Inst. No 123, 13–25. (Reprinted in Chaplygin SA (1933), Complete Oeuvres, AN Krylov (ed), Izd Akad Nauk SSSR, Leningrad, III , 323–337; Reprinted in Chaplygin SA (1950), Collected Works (in Russian), LS Leibenzon (ed), GITTL, Moscow-Leningrad, III , 151–168).
Ufliand YaS (1950), Bipolar Coordinates in the Theory of Elasticity (in Russian), GTTI, Moscow.
Lévy  M (1898), Sur l’équilibre élastique d’un barrage en maçonnerie a section triangulaire, C.R. Acad. Sci. Paris 127, 10–15.
Galerkin BG (1929), On the problem of stresses in dams and retaining walls with trapezoidal profile, Sbornik Leningr Inst. Inzh. Putei. Soobshch. No 99, 147–170. (Reprinted in Galerkin BG (1952), Collected Papers (in Russian), NI Muskhelishvili (ed), Izd Akad Nauk SSSR, Moscow, 1 , 252–273.)
Fillunger  P (1912), Dreiwichtige ebene Spannungszustände des keilformigen Körpers, Z. Math. Phys. 60, 275–285.
Flamant  A (1892), Sur la répartition des pressions dans un solide rectangulaire chargé transversalemant, C.R. Acad. Sci. Paris 114, 1465–1468.
Flamant  A (1893), De l’influence sur la flexion des poutres de la position superficielle de la chargé, Ann. Ponts Chaussées (ser. 7) 6, 228–260.
Wieghardt  K (1907), Über das Spalten und Zerreissen elastischen Körper, Z. Angew. Math. Phys. 55, 60–103.English translation: On splitting and cracking of elastic bodies, Fatigue Fract. Eng. Mater. Struct. (1995)18, 1371–1405.
Carothers  SD (1913), Plane stress in a wedge, with applications to masonry dams, Proc. R. Soc. Edinburgh 33, 292–306.
Fillunger  P (1910), Die Spannungsverteilung in keilformigen Körpern, auf welche eine Eizelkraft einwirkt, unter Beschränkung auf das ebene Problem, Z. Math. Phys. 59, 44–55.
Inglis  CE (1922), Some special cases of two-dimensional stress or strain, Trans. Inst. Naval Arch. 64, 253–261. (Also in Engineering 113, 483–484.)
Miura C (1928), Spannungskurven in rechteckigen und keilförmigen Trögern, (dissertation), Julius Springer-Verlag, Berlin.
Bay  H (1936), Die Berechnung der Schubspannungen in der Bogenscheibe, Ing.-Arch. 7, 118–125.
Sternberg  E and Koiter  WT (1958), The wedge under a concentrated couple: a paradox in the two-dimensional theory of elasticity, ASME J. Appl. Mech. 25, 575–581.
Barenblatt GI (1996), Scaling, Self-similarity, and Intermediate Asymptotics, Cambridge Univ Press, Cambridge.
Harrington  WJ and Ting  TW (1971), Stress boundary-value problems for infinite wedges, J. Elast. 1, 65–81.
Neuber  H (1963), Lösung des Carothers-Problems mittels Prinzipien der Kraftübertragung (Keil mit Moment an der Spitze), Z. Angew. Math. Mech. 43, 211–228.
Dempsey  JP (1981), The wedge subjected to tractions: a paradox resolved, J. Elast. 11, 1–10.
Ting  TCT (1984), The wedge subjected to tractions: a paradox re-examined, J. Elast. 14, 235–247.
Ting  TCT (1985), A paradox on the elastic wedge subjected to a concentrated couple and on the Jeffery-Hamel viscous flow problem, Z. Angew. Math. Mech. 65, 188–190.
Dundurs  J and Markenscoff  X (1989), The Sternberg-Koiter conclusion and other anomalies of the concentrated couple, ASME J. Appl. Mech. 56, 240–245.
Markenscoff  X (1994), Some remarks on the wedge paradox and Saint-Venant’s principle, ASME J. Appl. Mech. 61, 519–523.
Ding  HJ, Peng  NL, and Li  Y (1998), The wedge subjected to tractions proportional to rn: a paradox resolved, Int. J. Solids Struct. 35, 2695–2714.
Villaggio  P (1998), Some extensions of Carothers’s paradox in plane elasticity, Math. Mech. Solids 3, 17–27.
Brahtz  JHA (1933), Stress distribution in wedges with arbitrary boundary forces, ASME J. Appl. Mech. 1, 31–37.
Brahtz  JHA (1934), Stress distribution in wedges with arbitrary boundary forces, Physics (N.Y.) 4, 77–84.
Brahtz  JHA (1935), The stress function and photoelasticity applied to dams, Proc. Am. Soc. Civ. Eng. 61, 983–1020.
Shepherd  WM (1935), Stress systems in an infinite sector, Proc. R. Soc. London, Ser A 148, 284–298.
Abramov VM (1937), Stress distribution in a two-dimensional wedge under arbitrary load, Trudy Konferencii po Opticheskomu Methodu Analysa Napryazhenii (in Russian), NM Belyaey (ed), ONTI NKTP, Leningrad-Moscow, 134–142.
Figurnov  NM (1939), Study of the stress systems in an infinite quarter plane, loaded by a normal force applied at one of its side (in Russian), Prikl. Mat. Mekh. 3, 133–154.
Silverman  IK (1935), Discussion on “The stress function and photo-elasticity applied to dams” by John HA Brahtz, Proc. Am. Soc. Civ. Eng. 61, 1409–1412.
Silverman  IK (1955), Approximate stress function for triangular wedges, ASME J. Appl. Mech. 22, 123–128.
Richards J, Jr (1964), Body-force stresses in wedge-shaped gravity structures, PhD Thesis, Princeton Univ.
Lur’e AI and Brachkovskii BZ (1941), Solution of a plane problem of the theory of elasticity for a wedge (in Russian), Trudy Leningrad Politekhn Inst. No 3, 158–165.
Sakharov  IE (1948), Deflection of a wedge-shaped built-in plate under the action of an arbitrary load (in Russian), Prikl. Mat. Mekh. 12, 407–414. (English review in Appl. Mech, Rev. 1 , No 1610.)
Tranter  CJ (1948), The use of the Mellin transform in finding the stress distribution in an infinite wedge, Q. J. Mech. Appl. Math. 1, 125–130.
Sneddon IN (1951), Fourier Transforms, McGraw-Hill, New York.
Tranter CJ (1971), Integral Transforms in Mathematical Physics, 4th Edition, Chapman and Hall, London.
Coker  EG, Chakko  KC, and Ahmed  MS (1921), An account of some experiments on action of cutting tools, Proc. Inst. Mech. Eng. I, 365–433, 434–467 (discussion).
Coker  EG, and Chakko  KC (1922), An account of some experiments on action of cutting tools, Proc. Inst. Mech. Eng. II, 567–581.(Also in Engineering 103, 564–569.)
Woinowsky-Krieger  S (1952), Über die Anwendung der Mellin-Transformation zur Lösung einer Aufgabe der Plattenbiegung, Ing.-Arch. 20, 391–397.
Woinowsky-Krieger  S (1953), The bending of a wedge-shaped plate, ASME J. Appl. Mech. 20, 77–81.
Taylor GI (1960), Similarity solutions of hydrodynamics problems, Aeronautics and Astronautics, NJ Hoff and WG Vincenti (eds), Pergamon Press, London, 21–28.
Taylor GI (1962), On scraping viscous fluid from a plane surface, Miszellangen der Angewandten Mechanik (Festschrift Walter Tollmien), M Schäfer (ed), Akademie-Verlag, Berlin, 313–315.
Batchelor GK (1967), An Introduction to Fluid Dynamics, Cambridge Univ Press, Cambridge.
Moffatt  HK (1964), Viscous eddies near a sharp corner, Arch. Mech. Stosow. 2, 365–372.
Jeffrey  DJ and Sherwood  JD (1980), Streamline patterns and eddies in low-Reynolds-number flow, J. Fluid Mech. 96, 315–334.
Krasnopolskaya  TS (1995), Two-dimensional Stokes flow near a corner in a right angle wedge and Moffatt’s eddies, Mech. Res. Commun. 22, 9–14.
Ritz  W (1908), Über eine neue Methode zur Lösung gewisser Variationsprobleme der mathematischen Physik, J Reine Angew. Math 135, 1–61.
Rayleigh  Lord (1911), Hydrodynamical notes, Philos. Mag. (ser. 6)21, 177–195.(Reprinted in Strutt JW, Baron Rayleigh (1920), Scientific Papers, Cambridge Univ Press, Cambridge, 6 , 6–21.)
Nádai  A (1940), “Clamped rectangular plates with a central concentrated load”—A discussion, ASME J. Appl. Mech. 7, 42–43.
Woinowsky-Krieger  S (1956), Über die Verwendung von Bipolarkoordinaten zur Lösung einiger Probleme der Plattenbiegung, Ing.-Arch. 24, 47–52.
Dean  WR and Montagnon  PE (1949), On the steady motion of viscous liquid in a corner, Proc. Cambridge Philos. Soc. 45, 389–395.
Moffatt  HK (1964), Viscous and resistive eddies near a sharp corner, J. Fluid Mech. 18, 1–18.
Taneda  S (1979), Visualization of separating Stokes flows, J. Phys. Soc. Jpn. 46, 1935–1942.
Michael  DH and O’Neill  ME (1977), The separation of Stokes flows, J. Fluid Mech. 80, 785–794.
Hasimoto  H and Sano  O (1980), Stokeslets and eddies in creeping flow, Annu. Rev. Fluid Mech. 12, 335–363.
Tölke F (1938), Talsperren und Staumauren, Handbibliothek für Bauingenieure, R von Otzen (ed), Julius Springer-Verlag, Berlin, III/9 , 388–408. (German review in Zentralblatt Mech. 8, 63–65.)
Sobrero  L (1948), Sul comportamento dei sistemi elasici piani nell’intorno di spigoli rientranti, Rend. Sem. Fac. Sci. Univ. Cagliari 17, 67–87. (English review in Math. Revs. 10, 495.)
Williams ML (1951) Surface stress singularities resulting from various boundary conditions in angular corners of plates under bending, Proc of 1st US Natl Congress of Applied Mechanics, ASME, New York, 325–329.
Crawford  WJ (1912), The elastic strength of flat plates: an experimental research, Proc. R. Soc. Edinburgh 32, 348–389.
Winslow AM (1935), A study of fundamental relations of the mathematical theory of elasticity, Proc of 4th Int Congress for Applied Mechanics, Cambridge Univ Press, New York, 275–276.
Winslow  AM (1951), Differentiation of Fourier series in stress solutions for rectangular plates, Q. J. Mech. Appl. Math. 4, 449–460.
Rankine  WJM (1856), On the general integrals of the equations of internal equilibrium of an elastic solid, Proc. R. Soc. London 7, 196–202.
Rankine  WJM (1872), On the decomposition of forces externally applied to an elastic solid, Trans. Roy. Soc. Edinburgh 26, 715–727.
Carus Wilson  CA (1891), The influence of surface-loading on the flexure of beams, Philos. Mag. (ser. 5) 32, 481–503.
Nielsen NJ (1920), Bestemmelse of Spaendinger i Plader ved Anvendelse af Differenslignninger, Jorgensen, Copenhagen.
Marcus H (1924), Die Theorie elastischer Gewebe und ihre Anwendung auf die Berechnung biegsamer Platten, Julius Springer-Verlag, Berlin. (Also: 2nd Edition (1932).)
Bortsch  R (1929), Die Ermittlung der Spannungen in beliebig begrezten Scheiben, S-B. Akad. Wiss. Wien Mat.-Nat. Kl. 138, 401–424.
Bay H (1931), Über den Spannungszustand in hohen Trägern und die Bewehrung von Eisenbetontragwänden (dissertation), Wittwer, Stuttgart.
Bay  H (1932), Der wandartige Träger auf unendlich vielen Stüzen, Ing.-Arch. 3, 435–446.
Bay  H (1938), Über einige Fragen der Spannungsverteilung in Dreieck -und Recteckscheiben, Bauingenieur 19, 349–356.
Bay H (1960), Wandartiger Träger und Bogenscheibe, Wittwer, Stuttgart.
Bay H (1969), Lernen und Reifen: vom Erlebnis moderner Bautechnik, Beton-Verlag, Düsseldorf.
Varvak PM (1949), Development and Application of the Network Method to the Plate Design (in Russian), Izd Akad Nauk UkrSSR, Kiev.
Conway  HD, Chow  L, and Morgan  GW (1951), Analysis of deep beams, ASME J. Appl. Mech. 18, 163–172.
Beyer K (1956), Die Statik im Stahlbetonbau, Julius Springer-Verlag, Berlin.
Richardson  LF (1910), The approximate arithmetical solution by finite differences of physical problems involving differential equations, with an application to the stresses in a masonry dam, Philos. Trans. R. Soc. London, Ser. A 210, 307–357.
Pan  F and Acrivos  A (1967), Steady flows in rectangular cavities, J. Fluid Mech. 28, 643–655.
Biezeno  CB and Koch  JJ (1923), Over een nieuwe methode ter berekening van vlakke platen, met toepassing op eenige voor de techniek belangrijke belastingsgevallen, Ingenieur 38, 25–36.
Southwell  RV (1945), On relaxation methods: A mathematics for engineering science, (Bakerian lecture), Proc. R. Soc. London, Ser. A 184, 253–288.
Southwell RV (1956), Relaxation Methods in Theoretical Physics, Clarendon Press, Oxford.
Fox  L and Southwell  RV (1946), Relaxation methods applied to engineering problems. VII A. Biharmonic analysis as applied to the flexure and extension of flat elastic plates, Philos. Trans. R. Soc. London, Ser. A 239, 419–460.
Fox  L (1947), Mixed boundary conditions in the relaxational treatment of biharmonical problems (plane strain or stress), Proc. R. Soc. London, Ser. A 189, 535–543.
Leissa  AW, Clausen  WE, Hulbert  LE, and Hopper  AT (1969), A comparison of approximate methods for the solution of plate bending problems, AIAA J. 7, 920–928.
Grashof F (1878), Theorie der Elasticität und Festigkeit mit Bezug auf ihre Anwendungen in der Technik, 2nd Edition, Gärtner, Berlin.
Lanza G (1885), Applied Mechanics, John Wiley and Sons, New York.
Bach C (1890), Elastizität und Festigkeit: die für die Technik wichtigsten Sätze und deren erfahrungsmässige Grundlage, Julius Springer-Verlag, Berlin. (Also: 2nd Edition (1894), 3rd Edition (1898), 4th Edition (1902), 5th Edition (1907), 6th Edition (1913), 7th Edition (1917), 8th Edition (with R Baumann) (1920), 9th Edition (with R Baumann) (1924).)
Kirsch B (1919), Vorlesungen über Technische Mechanik elastischer Körper, Deuticke, Wien.
Pigeaud G (1920), Résistance des matériaux et élasticité, Gauthier-Villars, Paris.
Prescott J (1924), Applied Elasticity, Longmans, Green and Co, New York.
Seely FB (1925), Resistance of Materials, John Wiley and Sons, New York.
Salmon EH (1931), Mechanics and Structures, 1, Longmans, Green and Co, London.
Case J (1932), The Strength of Materials: A Treatise on the Theory of Stress Calculation for Engineers, Arnold, London.
Laws  BC and Allen  AO (1926), Lines of maximum principal stress in thin mild steel plates of rectangular shape fixed along the edges and uniformly loaded, Philos. Mag. (ser. 7) 1, 1039–1042.
Gerard  FA (1950), The design of flat plates, Struct. Eng. 28, 165–172.
Read  TC (1886), On the strength of bulkheads, Trans. Inst. Naval Arch. 27, 395–408.
Elgar  F (1893), Some considerations relating to the strength of bulkheads, Trans. Inst. Naval Arch. 34, 38–49, 50–59 (discussion). (Also in Engineering 51, 370–371, 427–428.)
Bach  C (1908), Versuche über die Formänderung und die Widerstandsfähigkeit ebener Wandungen, Z. Ver. Deuts. Ing. 52, 1781–1789 (1876–1881).
Pietzker F (1911), Festigkeit der Schiffe, Reichs-Marine-Arm, Berlin (Also: 2nd Edition (1914).)
Pietzker F (1913), The Strength of Ships (in Russian), Izd Morskogo Ministerstva, St Petersburg.
Pietzker F (1959), The Strength of Ships, SNAME, New York.
Belzeckii  S (1906), Several remarks on the elementary theory of bending of straight beams (in Russian), Izvestiya Sobr. Inzh. Putei Soobshch. 26, 123–124.
Ribière CH (1889), Sur divers cas de la flexion des prismes rectangles (Doctorat thèse), Bordeaux.
Jeffery  GB (1938), Louis Napoleon George Filon, J. Lond. Math. Soc. 13, 310–318.
Belzeckii  S (1905), Flexure of a straight beam resting on two supports (in Russian), Izvestiya Sobr. Inzh. Putei Soobshch. 25, 199–202.
Bleich  F (1923), Der gerade Stab mit Rechteckquerschnitt als ebenes Problem, Bauingenieur 4, 255–259, 304–307, 327–331).
Meleshko  VV (1995), Equilibrium of elastic rectangle: Mathieu-Inglis-Pickett solution revisited, J. Elast. 40, 207–238.
Ritz W (1908), Über eine neue Methode zur Lösung gewisser Randwertaufgaben, Nachr. Ges. Wiss. Goettingen, Math.-Phys. Kl. 236–248.
Rayleigh, Lord (1894), The Theory of Sound, 2nd Edition1 , Macmillan, London.
Goldsbrough  GR (1929), Note on the method of Ritz for the solution of problems in elasticity, Philos. Mag. (ser. 7) 7, 332–337.
Kantorovich LV and Krylov VI (1936), Approximate Methods for Solving of Partial Differential Equations (in Russian), ONTI, Leningrad-Moscow.
Kantorovich LV and Krylov VI (1949), Approximate Methods of Higher Analysis, 3rd Edition (in Russian), GITTL, Leningrad-Moscow.
Kantorovich LV and Krylov VI (1958), Approximate Methods of Higher Analysis, Noordhoff, Groningen.
Ritz W (1911), Oeuvres, Gauthier-Villars, Paris.
Rayleigh  Lord (1911), On the calculation of Chaldni’s figures for a square plate, Philos. Mag. (ser. 6) 22, 225–229.(Reprinted in Strutt JW, Baron Rayleigh (1920), Scientific Papers, Cambridge Univ Press, Cambridge, 6 , 47–50.)
Pistriakoff  D (1910), Bending of a thin plate (in Russian, with French summary), Izvestiya Kiev Politekh. Inst. 10, 311–373.
Paschoud M (1914), Sur l’application de la methode de W Ritz à l’ètude de l’équilibre élastique d’une plaque carrée mince (Doctorat thèse), Gauthier-Villars, Paris.
Salvati M (1936), II calcolo della lastra piana rettangolare con carico uniformente, Accolti-Gil, Bari.
Knott  CG (1912), Comparison of Mr Crawford’s measurements of the deflection of a clamped square plate with Ritz’s solution, Proc. R. Soc. Edinburgh 32, 390–392.
Nádai  A (1914), Die Formänderungen und die Spannungen von rechtickigen elastischen Platten, Z. Ver. Deuts. Ing. 58, 486–494, 540–550.
Mesnager  A (1916), Moments et flèches des plaques rectangulaires minces, portant une charge uniformément répartie, Ann. Ponts Chaussées (ser. 7) 33, 313–438.
Mesnager  A (1916), Formule de la plaque mince encastrée sur un contour rectangulaire plan, C.R. Acad. Sci. Paris 163, 661–663.
Mesnager  A (1917), Formule en série simple de la plaque uniformément chargée, encastrée sur un contour rectangulaire plan, C.R. Acad. Sci. Paris 164, 169–172.
Laws  BC (1937), Deflexion of thin rectangular plates clamped at the edges and uniformly loaded, Philos. Mag. (ser. 7) 24, 1072–1082.
Pickett  G (1939), Solution of rectangular clamped plate with lateral load by generalized energy method, ASME J. Appl. Mech. 6, 168–170.
Wegner  U (1942), Ein neues Verfahren zur Berechnung der Spannung in Scheiben, Forsch. Geb. Ingenieurwes. B13, 144–149.
Weinstein A and Rock DH (1944), On the bending of a clamped plate, Quart. Appl. Math.2 , 262–266. (Reprinted in Alexander Weinstein Selecta (1978), JB Diaz (ed), Pitman, London, 202–206.)
Weinstein  A and Jenkins  JA (1946), On a boundary value problem for a clamped plate, Trans. R. Soc. Can. 40, 59–67.
Djurić  M (1950), Solution du problème de la plaque rectangulaire à l’aide des fonctions orthogonales des oscillations transversales d’une poutre, Publ. Inst. Math. Acad. Serbie Sci. 3, 79–88. (English review in Math Revs 12, 558.)
Rafal’son EH (1952), Concerning the solution of the biharmonic equation (in Russian), Uchenye Zapiski Leningrad Gos. Univ. Ser. Mat. Nauk 164–191.
Hajdin  M (1953), Contribution à la solution du problème plan, Publ. Inst. Math. Acad. Serbie Sci. 5, 53–62. (English review in Math. Revs. 16, 974.)
Weiss  RF and Florsheim  BH (1965), Flow in a cavity at low Reynolds number, Phys. Fluids 8, 1631–1635.
Kryloff  N (1925), Sur différents procédés d’intégration approchée en physique mathématique, Ann. Fac. Sci. Univ. Toulouse Sci. Math. Sci. Phys. 17, 153–186.
Ioffe A, Kriloff [Krylov] A, and Lazareff P (1928), A note on the scientific papers by Prof BG Galerkin (in Russian), Izvestuya Ros. Akad. Nauk 616–618.
Luchka AYu and Luchka TF (1985), Origin and Development of the Direct Methods of the Mathematical Physics (in Russian), Naukova Dumka, Kiev.
Kryloff  N (1927), Sur l’intégration approchée des quelques équations aux dérivées partielles de la physique mathématique, C.R. Acad. Sci. Paris 184, 587–589.
Trefftz E (1926), Ein Gegenstück zum RITZ schen Verfahren, Verhandlungen des zweiten Internationalen Kongresses für technische Mechanik, Füssli, Zürich, 131–137.
Trefftz  E (1928), Konvergenz und Fehlerschätzung beim RITZ schen Verfahren, Math. Ann. 100, 503–529.
Courant  R (1927), Über direkte Methoden in der Variationsrechnung und über verwwandte Fragen, Math. Ann. 97, 711–736.
Friedrichs  K (1928), Die Randwert-und Eigenwertprobleme aus der Theorie der elastischen Platten (Anwendung der direkten Methoden der Variationsrechnung), Math. Ann. 98, 205–247.
Rafal’son  EH (1949), Concerning the solution of the biharmonic equation, Dokl. Akad. Nauk SSSR 64, 799–802.(English review in Math. Revs. 10, 707.)
Stodola  A (1914), Ueber die Schwingungen von Dampfturbinen-Laufräden, Schweiz. Bauzeitung 63, 251–255, 277–275.
Young  D (1950), Vibration of rectangular plates by the Ritz method, ASME J. Appl. Mech. 17, 448–453.
Bateman H (1932), Partial Differential Equations of Mathematical Physics, Cambridge Univ Press, Cambridge.
Courant  R (1943), Variational methods for the solutions of problems of equilibrium and vibrations, Bull. Am. Math. Soc. 49, 1–23.
Leissa AW (1969), Vibration of Plates, NASA SP-160.
Davydov AK (1935), A letter to PF Papkovich (in Russian), Reminiscences about PF Papkovich (1984), BI Slepov (ed), Nauka, Leningrad, 159–161.
Timoshenko  SP (1910), Application of normal coordinates in analysing bending of beams and plates (in Russian, with French summary), Izvestiya Kiev Politekh. Inst. 10(1), 1–49. (German review in Jbuch. Fortschr. Math. 41, 903–905; Reprinted in Timoshenko SP (1975), Strength and Vibrations of Structural Elements (in Russian), EI Grigolyuk (ed), Nauka, Moscow, 180–219.)
Lorenz  H (1913), Angenäherte Berechnung rechteckiger Platten, Z. Ver. Deuts. Ing. 57, 623–625.
Hager K (1911), Berechnung ebener, rechteckiger Platten mittels trigonometrischer Reihen, Oldenbourg, München.
Galerkin  BG (1915), Rectangualr plates supported by edges, Izvestiya S Petersburg Politekh Inst 24, 219–282. (Reprinted in Galerkin BG (1953), Collected Papers (in Russian), NI Muskhelishvili (ed), Izd Akad Nauk SSSR, Moscow, 2 , 3–42.)
Timoshenko  SP (1924), The approximate solution of two-dimensional problems in elasticity, Philos. Mag. (ser. 6) 47, 1095–1104.(Reprinted in Timoshenko SP (1953), The Collected Papers, McGraw-Hill, New York, 393–400.)
Inglis  CE (1923), Stress distribution in a rectangular plate having two opposing edges sheared in oppoisite directions, Proc. R. Soc. London, Ser. A 103, 598–610.
Goodier  JN (1932), Compression of rectangular blocks, and the bending of beams by non-linear distributions of bending forces, Trans. ASME, Appl. Mech. 54, 554–576.
von Krzywoblocki  MZ (1948), A general approximation method in the theory of plates of small deflection, Q. Appl. Math. 6, 31–52.
von Krzywoblocki  MZ (1951), On the so-called principle of least work method, Österreich Ing.-Arch. 5, 81–98.
Horvay  G (1953), The end problem of rectangular strips (discussion), ASME J. Appl. Mech. 20, 576–582.
Ishlinskii AYu (1962), Mikhail Mitrofanovich Filonenko-Borodich, an obituary notice (in Russian), Stroit. Mekh. Raschet Soor. No 5 46–47. (Reprinted: Ishlinskii AYu (1962), Mechanics: Ideas, Problems, Applications, PYa Kochina (ed), Nauka, Moscow, 534–537.)
Ogibalov PM, Kishkin BP, and Netrebko VP (1972), Life and activity of Mikhail Mitrofanovich Filonenko-Borodich (in Russian), Vestnik Moskov Univ. Ser. Mat. Mech. No 5 124–129.
Filonenko-Borodich  MM (1946), On a certain system of functions and its application in the theory of elasticity (in Russian), Prikl. Mat. Mekh. 10, 192–208.
Filonenko-Borodich MM (1947), The bending of a rectangular plate with two clamped opposite edges (in Russian), Vestnik Moskov Univ Ser Fiz-Mat Estest Nauk 29–36. (English review in Appl. Mech. Rev. 3 , No 650.)
Danilovskaya  VI (1968), An application of Castigliano variational method to the plane problem of thermoelasticity (in Russian), Prikl. Mekh. 4(12), 33–40.
Horvay  G (1953), The end problem of rectangular strips, ASME J. Appl. Mech. 20, 87–94.
Horvay  G (1957), Biharmonic eigenvalue problem of the semi-infinite strip, Q. Appl. Math. 15, 65–81.
Horvay  G (1957), Saint-Venant’s principle: a biharmonic eigenvalue problem, ASME J. Appl. Mech. 24, 381–386.
Horvay  G (1957), Some aspects of Saint-Venant’s principle, J. Mech. Phys. Solids 5, 77–94.
Horvay G and Born JS (1955), The use of self-equilibrating functions in solution of beam problems, Proc of 2nd US Nat Congress of Applied Mechanics, PM Naghdi (ed) ASME, New York, 267–276.
Galerkin  BG (1915), Rods and plates. Series in some questions of elastic equilibrium of rods and plates, Vestnik Inzh. 1, 897–908. (Reprinted in Galerkin BG (1952), Collected Papers, (in Russian), NI Muskhelishvili (ed), Izd Akad Nauk SSSR, Moscow, 1 , 168–195.)
Grigorian AT (1971), Galerkin, Boris Grigor’evich, Dictionary Scientific Biography, CC Gillispie (ed), Scribner, New York, VIII , 607–608.
Sokolovskii VV (1951), On life and scientific activity of Academician BG Galerkin, Izvestiya Akad. Nauk SSSR Otd. Tech. Nauk 1159–1164, (in Russian).
Hencky H (1913), Überden Spannungszustand in rechteckigen ebenen Platten bei gleichmässig verteilter und bei konzentrierter Belastung (dissertation), Oldenbourg, München (Reprinted Hencky H (1913), Der Spannungszustand in rechteckigen Platten, Oldenbourg, München.)
Bubnov IG (1914), Structural Mechanics of a Ship (in Russian), 2 , Izd Morskoi Akademii, St Petersburg.
Simič  J (1908), Ein Beitrag zur Berechnung der rechteckigen Platten, Z. Österreich Ing.-Architekt. Verein. 60, 709–714.
Hencky H (1924), Über ein einfaches Näherungsverfahren zur Bestimmung des Spannungszustandes in rechtekig begrenzten Scheiben, auf deren Umfang nur Normalspannungen wirken, Beträge zur technischen Mechanik und technischen Physik. August Föppl zum 70en Geburstage, O Föppl, L Föppl, L Prandtl, and H Thoma (eds), Julius Springer-Verlag, Berlin, 62–73.
Perel’man  YaI (1941), Galerkin’s method in calculus of variations and in the theory of elasticity (in Russian), Prikl. Mat. Mekh. 5, 345–358.
Sokolovskii VV and Shapiro GS (1947), Galerkin’s methods in the theory of elasticity, Jubilee Collection dedicated to 30th Anniversary of the October Revolution (in Russian), SI Vavilov (ed) Izd Akad Nauk SSSR, Moscow-Leningrad, 2 , 559–570.
Grigolyuk EI (1975), On Bubnov’s method (on the 60th anniversary of its creation), Issledovaniya po Teorii Plastin Obolochek (in Russian), KZ Galimov (ed), Izd Kazan Univ Kazan, 11 3–40.
Grigolyuk EI (1996), The Bubnov Method: Sources, Formulation, Development (in Russian), Izd Inst Mekh MGU, Moscow.
Vorovich II (1975), The Bubnov-Galerkin method, its development and role in applied mathematics, Advances in Mechanics of Deformable Bodies. Dedicated to the 100th Birthday of BG Galerkin (in Russian), AYu Ishlinskii (ed), Nauka, Moscow, 121–133.
Biezeno  CB (1924), Graphical and numerical stress determination in beams and plates, Ingenieur 39, 712–713.
Biezeno  CB (1924), Over een vereenvoudiging en over een uitbreiding van de methode van Ritz, Christiaan Huygens 3, 69–75.
Hencky  H (1927), Eine wichtige Vereinfachung der Methode von Ritz zur angennäherten Behandlung von Variationproblemen, Z. Angew. Math. Mech. 7, 80–81.
Papkovich, PF (1935), A letter to AK Davydov, Reminiscences about PF Papkovich, (1984) (in Russian), BI Slepov (ed), Nauka, Leningrad, 161–162.
Sommerfeld A (1949), Partial Differential Equations, Academic Press, New York.
Papkovich, PF (1944), From reminiscences, Reminiscences about PF Papkovich (1984) (in Russian), BI Slepov (ed), Nauka, Leningrad, 206–224.
Vol’mir AS (1953), An essay on the life and work of IG Bubnov, Bubnov IG (1953), Works on the Plate Theory (in Russian), AS Vol’mir (ed), GITTL, Moscow, 308–393.
Dormidontov FK (1956), Ivan Grigor’evich Bubnov, a short essay on his life and activity, Bubnov IG (1956), Selected Works (in Russian), YuA Shimanskii (ed), Sudpromgiz, Leningrad, 408–433.
Belkin MP (1973), Famous naval architect and prominent scientist Ivan Grigor’evich Bubnov, Problems of Structural Mechanics of a Ship. To 100th Birthday of IG Bubnov (1973) (in Russian), VV Novozhilov (ed) Sudostrenie, Leningrad, 3–27.
Novozhilov VV (1973), Ivan Grigor’evich Bubnov and structural mechanics, Problems of Structural Mechanics of a Ship. To 100th Birthday of IG Bubnov, VV Novozhilov (ed) Sudostrenie, Leningrad, 28–33. (Reprinted in Novozhilov VV (1989), Topics in Continuum Mechanics (in Russian), Sudostrenie, Leningrad, 377–381.)
Grigolyuk  EI (1997), Ivan Grigor’evich Bubnov. On the 125th anniversary of his birth, 6(18) January 1872–13 March 1919 (in Russian), Prikl. Mat. Mekh. 61, 179–183.(English translation: J. Appl. Math. Mech. 61, 173–176.)
Bubnov IG (1913), Referee’s report on the memoir by Professor Timoshenko “On the stability of elastic systems” crowned by the DI Zhuravskii prize, Sbornik St Petersburg Inst. Inzh. Putei Soobshch. 81 (7), 33–36. (Reprinted in Bubnov IG (1956), Selected Works (in Russian), YuA Shimanskii (ed) Sudpromgiz, Leningrad, 136–139.)
Mikhlin SG (1957), Variational Methods in Mathematical Physics (in Russian), GITTL, Moscow.
Mikhlin SG (1964), Variational Methods in Mathematical Physics, Pergamon Press, Oxford.
Karmanov VG (1975), Ritz and Galerkin methods, Large Soviet Encyklop, 3rd Edition (in Russian), AM Prokhorov (ed), Sovetskaya Encyklopediya, Moscow, 22 , 397–399.
Meleshko  VV (1998), Biharmonic problem in a rectangle, Appl. Sci. Res. 58, 217–249.
Kantorovich LV (1933), One direct method of an approximate solution of the problem of a minimum of a double integral (in Russian), Izvestiya Akad. Nauk SSSR Otd. Mat. Est. Nauk (ser. 7) No 5, 710–717.
Kantorovich  LV (1942), Application of Galerkin’s method to the so-called procedure of reduction to ordinary differential equations (in Russian), Prikl. Mat. Mekh. 6, 31–40.
Semenov  NS (1939), Application of the method of variation developed by L Kantorovich for the solution of problems of bending of thin rectangular plates (in Russian, with English summary), Prikl. Mat. Mekh. 3, 107–116.(German review in Zentralblatt Mech. 11, 12–13.)
Whittaker  ET (1937), Alfred Cardew Dixon, J. London Math. Soc. 12, 145–154. (Also: Obit Notices Fellows Roy. Soc. London 2, 165–174.)
Dixon  AC (1921), Expansions and functions reduced to zero the operator sinh D−cD,Proc. London Math. Soc. (ser. 2) 21, 271–290.
Dixon  AC (1925), The functions involved in the theory of a thin elastic rectangular plate, clamped at the edges, and certain integral equations satisfied by such functions, Proc. London Math. Soc. (ser. 2) 25, 417–450.
Miln  EH (1941), Obituary: Augustus Edward Hough Love, 1863–1940, J. London Math. Soc. 16, 69–80. (Also: Obit Notices Fellows Roy. Soc. London 3, 467–482; Nature 146, 393–394.)
Calladine  CR (1988), The theory of thin elastic structures 1888–1988, Proc. Inst. Mech. Eng. 202(A3), 141–149.
Love  AEH (1929), Biharmonic analysis, especially in a rectangle, and its application to the theory of elasticity, Proc. London Math. Soc. (ser. 2) 29, 189–242.
Seth  BR (1947), Bending of clamped rectilinear plates, Philos. Mag. (ser. 7) 38, 292–297.
Radenkovič  D (1949), A solution of the problem of steady state stresses for a rectangular domain, Glas Srpske Akad. Nauka 195, 89–104, (in Serbian). (English review in Math. Revs. 11, 436.)
Radenkovič  D (1950), Une solution du problème à deux dimensions de la théorie de l’élasticité, Publ. Inst. Math. Acad. Serbie Sci. 3, 127–136. (English review in Math. Revs. 12, 652; Appl. Mech. Rev. 4, No 3798.)
Winslow  AM (1956), Stress solutions for rectangular plates by conformal transformation, Q. J. Mech. Appl. Math. 10, 160–168.
Magnaradze  LG (1937), Basic problems of plane theory of elasticity for contours with corners, Dokl. Akad. Nauk SSSR 16, 157–161.
Magnaradze  LG (1938), Solution of the fundamental problems of plane theory of elasticity in the case of contours with corners, Dokl. Akad. Nauk SSSR 19, 673–676.(German review in Jbuch. Fortschr. Math. 64, 828.)
Deverall  LI (1957), Solution of some problems in bending of thin clamped plates by means of the method of Muskhelishvili, ASME J. Appl. Mech. 24, 295–298.
Belonosov SM (1962), Basic Plane Static Problems of the Theory of Elasticity (in Russian), Izd Akad Nauk SSSR, Novosibirsk.
Belonosov SM (1966), Mathematical problems of the theory of elasticity for domains with angles, Trudy II Vsesoyuz s’ezda Teor Prikl. mekh. Vol. 3. Mechanics of Solids (in Russian), AS Vol’mir and GK Mikhailov (eds), Nauka, Moscow, 3 , 48–60.
Thomson W and Tait PG (1883), Treatise on Natural Philosophy, Cambridge Univ Press, Cambridge.
Mikhel’son  NN (1973), Boris Mikhailovich Koialovich (in Russian), Istor.-Mat. Issled 18, 310–321.
Koialovich BM (1894) A study of the differential equation ydy−ydx=Rdx. (Master dissertation), Izd St Petersburg Univ, St Petersburg, (in Russian). (German review in Jbuch. Fortschr. Math. 26, 365–369.)
Sobolev  SL (1936), L’álgorithme de Schwarz dans la théorie de l’élasticité, Dokl. Akad. Nauk SSSR 4, 243–246.
Grattan-Guinnes I (1972), Joseph Fourier 1768–1830. A survey of his life and work, based on a critical edition of his monograph on the propagation of heat presented to the Institut de France in 1807, MIT Press, Cambridge MA.
Fourier J (1955), The Analytical Theory of Heat, Dover, New York.
Riesz F (1913), Les systèmes d’équations linéaires à une infinité d’inconnues, Gauthier-Villars, Paris.
Bubnov IG (1904), Stresses in the bottom plating of ship due to water pressure (in Russian), (Adjunct dissertation), Venike, St-Petersburg.
Bubnov  IG (1902), Stresses in the bottom plating of ship due to water pressure, Morskoi Sbornik 312(10), 119–138. (Reprinted in Bubnov IG (1953), Researches on the Plate Theory (in Russian), AS Vol’mir (ed) GITTL, Moscow, 61–80.)
Koialovich  BM (1930), Studies on infinite systems of linear equations (in Russian), Izvestiya Fiz-Mat Inst Steklov 3, 41–167. (German review in Jbuch Fortschr. Math.61 , 414.)
Bubnov IG (1953), Researches on the Plate Theory (in Russian), AS Vol’mir (ed), GITTL, Moscow.
Happel H (1914), Über das Gleichgewicht rechteckiger Platten, Nachr. K. Ges. Wiss. Göttingen Math.-Phys. Kl. 37–62.
Nádai  A (1915), Die Formänderungen und die Spannungen von rechteckigen elastischen Platten, Forsch. Geb. Ingenieurwes. 170/171, 1–87.
Leitz  H (1917), Berechnung der eingespannten rechteckigen Platte, Z. Math. Phys. 64, 262–272.
March  HW (1925), The deflexion of a rectangular plate fixed at the edges, Trans. Am. Math. Soc. 27, 307–317.
Schmidt  H (1932), Zur Statik eingespannter Rechtecks-platten, Z. Angew. Math. Mech. 12, 142–151.
Iguchi S (1933), Eine Lösung für die Berechnung der biegsamen rechteckigen Platten, Julius Springer-Verlag, Berlin.
Tölke  F (1934), Über Spannungszustände in dünnen Rechtecksplatten, Ing.-Arch. 5, 187–237.
Shimanski YuA (1934), Bending of Plates (in Russian), ONTI, Leningrad.
Wojtaszak  IA (1937), The calculation of maximum deflection, moment, and shear for uniformly loaded rectangular plate with clamped edges, ASME J. Appl. Mech. 4, 173–176.
Bourgin  DG (1939), The clamped square sheet, Am. J. Math. 61, 417–439.
Evans  TH (1939), Tables of moments and deflections for a rectangular plate fixed on all edges and carrying a uniformly distributed load, ASME J. Appl. Mech. 6, 7–10.
Timoshenko SP (1939), Bending of rectangular plates with clamped edges, Proc of 5th Int Congress for Applied Mechanics, John Wiley and Sons, New York, 40–43.
Young  D (1939), Clamped rectangular plates with a central concentrated load, ASME J. Appl. Mech. 6, 114–116.
Young  D (1940), Clamped rectangular plates with a central concentrated load, J. Roy. Aeronaut. Soc. 44, 350–354.
Young  D (1940), Analysis of clamped rectangular plates, ASME J. Appl. Mech. 7, 139–142.
Göhner  O (1940), Zur Berechnung des gekrümmten Trägers, Ing.-Arch. 11, 344–360.
Green  AE (1944), Double Fourier series and boundary value problems, Proc. Cambridge Philos. Soc. 40, 222–228.
Goriupp  K (1947), Die dreiseitig gelagerte Rechteckplatte, I, II, Ing.-Arch. 16, 77–98, 153–163.
Odley  EG (1947), Deflections and moments of a rectangular plate clamped on all edges and under hydrostatic pressure, ASME J. Appl. Mech. 14, 289–299.
Stiles  WR (1947), Bending of clamped plates, ASME J. Appl. Mech. 14, 55–62.
Ohling  R (1949), Die eingespannte Rechteckplatte, Ing.-Arch. 17, 243–263.
Klitchieff  JM (1950), Some series applied to the theory of structures, Publ. Inst. Math. Acad. Serbie Sci. 3, 1–23. (English review in Math. Revs. 12, 559–560; Appl. Mech. Rev. 4, No 2405.)
Klitchieff  JM (1951), On bending of a rectangular plate (in Serbian), Glas Srpske Akad. Nauka Od. Tekn. Nauka CX-CIX(2), 91–95. (English review in Appl. Mech. Rev. 5, No 1340.)
Klitchieff  JM (1951), Über die Biegung rechteckiger Platten, Bull. Acad. Serbie Sci. Ci. Sci. Tech. 2, 69–76. (English review in Math. Revs. 13, 404.)
Girkmann  K and Tungl  E (1953), Näherungsweise Berechnung eigespannter Rechteckplatten, Österreich Bauzeitschr. 8, 47–60.
Fletcher HJ and Thorne CJ (1955), Bending of thin rectangular plates, Proc of the 2nd US Nat Congress of Applied Mechanics, PM Naghdi (ed), ASME, New York, 389–406.
Coffman  CV (1986), On the construction of series solution to the first biharmonic boundary value problem in a rectangle, SIAM J. Math. Anal. 17, 384–402.
Grinchenko  VT and Ulitko  AF (1965), Bending of a square elastic plate by a uniform load (in Russian), Prikl. Mekh. 1(9), 71–75.
Meleshko  VV (1997), Bending of an elastic rectangular clamped plate: Exact versus ‘engineering’ solutions, J. Elast. 48, 1–50.
Meleshko  VV and Gomilko  AM (1997), Infinite systems for a biharmonic problem in a rectangle, Proc. R. Soc. London, Ser. A 453, 2139–2160.
Koialovich  BM (1932), On the theory of infinite systems of linear equations (reply to Prof RO Kuz’min) (in Russian), Trudy Fiz.-Mat. Inst. Steklov 2(4), 1–16. (German review in Jbuch. Fortschr. Math. 58, 1115–1116.)
Koialovich  B (1935), Etudes sur les systèmes linéaires infinis, Zhurnal Inst. Mat. Ukrain Akad. Nauk 1(1), 49–74.
Koialovich  BM (1937), On the basic notions of the theory of the infinite systems of the linear equations (in Russian), Uchenye Zapiski Leningrad. Gos. Pedagog. Inst. 5, 83–99.
Kuz’min  RO (1931), On the theory of infinite systems of linear equations (in Russian), Trudy Fiz.-Mat. Inst. Steklov. 2(2), 1–16. (German review in Jbuch. Fortschr. Math. 58, 1115.)
Kuz’min RO (1934), On one class of the infinite systems of the linear equations (in Russian), Izvestiya. Akad. Nauk SSSR Otd. Mat. Est. Nauk (ser. 7), No 8, 515–546. (German review in Jbuch. Fortschr. Math. 60, 320.)
Meleshko  VV and Gomilko  AM (1994), On the bending of clamped rectangular plates, Mech. Res. Commun. 21, 19–24.
Meleshko  VV, Gomilko  AM, and Gourjii  AA (2001), Normal reactions in a clamped elastic rectangular plate, J. Eng. Math. 40, 377–398.
Inglis  CE (1921), Two dimensional stresses in rectangular plates, Engineering 112, 523–524.
Sezawa  K (1923), The stress on rectangular plates, Engineering 116, 188–191.
Kuno  J (1932), Application of the law of photo-elastic extinction to some problems, Philos. Mag. (ser. 7) 13, 810–824.
Klitchieff  J (1936), Eine Lösung der ebenen Spannungsaufgabe mittels trigonometrischer Reihen, Publ. Math. Univ. Belgrade 5, 157–162.
O⁁kubo  H (1940), Similarity of the stress distributions in a circular disk and a square plate, J. Appl. Phys. 11, 720–723.
Ling  C-B, Lee  T-C, and Chang  T-Y (1944), Stresses in a rectangular plate under a pair of symmetric loads inside the plate, Techn. Rep. Chinese Bureau Aero. Res. No. 15. (Reprinted in Ling C-B (1963), The Collected Papers, Academia Sinica, Taipei, 125–145.)
Pickett  G (1944), Application of the Fourier method to the solution of certain boundary problems in the theory of elasticity, ASME J. Appl. Mech. 11, 176–182.
Parkus  H (1948), Der wandartige Träger auf drei Stützen, Österreich Ing.-Arch. 2, 185–200.
Mann  EH (1949), Shearing displacement of a rectangular plate, Proc. Cambridge Philos. Soc. 45, 258–362.
Abramyan  BL (1955), On one case of the plane problem of the theory of elasticity for a rectangle (in Russian) Dokl. Akad. Nauk Armyan. SSR 21, 193–198.(English review in Math. Revs. 17, 915.)
Abramyan  BL (1957), On a plane problem of the theory of elasticity for a rectangle (in Russian), Prikl. Mat. Mekh. 21, 89–101.
Teodorescu  PP (1957), Asupra calculului grinzilor pereticu o singură deschidere, Stud. Cerc. Mecan. Apl. 8, 115–134, 451–490.
Ling  C-B and Cheng  F-H (1971), Stress systems in a rectangular plate, Appl. Sci. Res. 25, 97–112.
Baker  G, Pavlović  MN, and Tahan  N (1993), An exact solution to the two-dimensional elasticity problem with rectangular boundaries under arbitrary edge forces, Philos. Trans. R. Soc. London, Ser. A 343, 307–336.
Kalmanok AS (1950), Structural Mechanics of Plates (in Russian), Mashstroiizdat, Moscow. (English review Appl. Mech. Rev. 5, No. 74.)
Kalmanok AS (1956), Design of Deap Beams (in Russian), Gosstrojizdat, Moscow.
Takematsu  M (1965), Viscous flow in a two-dimensional cavity, J. Phys. Soc. Jpn. 20, 283.
Meleshko  VV (1996), Steady Stokes flow in a rectangular cavity, Proc. R. Soc. London, Ser. A 452, 1999–2022.
Dougall  J (1904), An analytical theory of the equilibrium of an isotropic elastic plate, Trans. Roy. Soc. Edinburgh 41, 129–228.
Filon  LNG (1907), On the expansion of polynomials in series of functions, Proc. London Math. Soc. (ser. 2) 4, 396–430.
Andrade EN da  C (1911), The distribution of slide in a rigid six-face subject to pure shear, Proc. R. Soc. London, Ser. A 85, 448–461.
Lourye [Lu’re]  AI (1942), On the theory of thick plates (in Russian), Prikl. Mat. Mekh. 6, 151–168.(English review in Math. Revs. 5, 138.)
Prokopov  VK (1952), One plane problem of the theory of elasticity for a rectangular region (in Russian), Prikl. Mat. Mekh. 16, 45–56.(English review in Math. Revs. 14, 221.)
Papkovich PF (1941), Structural Mechanics of a Ship (in Russian), 2 , Sudpromgiz, Leningrad.
Slepov BI (1991), Petr Fedorovich Papkovich, 1887–1946 (in Russian), Nauka, Leningrad.
Pozdyunin VL (1944), A nomination for PF Papkovich by the board of the all Union naval architects society for the Stalin prize, Reminiscences about PF Papkovich (1984) (in Russian), BI Slepov (ed), Nauka, Leningrad, 262–267.
Gaydon  FA and Shepherd  WM (1965), Generalized plane stress in a semi-infinite strip under arbitrary end-load, Proc. R. Soc. London, Ser. A 281, 184–205.
Horgan  CO (1978), Plane entry flows and energy estimates for the Navier-Stokes equations, Arch. Ration. Mech. Anal. 68, 359–381.
Horgan  CO (1989), Decay estimates for the biharmonic equation with applications to Saint-Venant principles in plane elasticity and Stokes flows, Q Appl Math 47, 147–157.
Papkovich  PF (1940), On one form of solution of the plane problem of the theory of elasticity for a rectangular strip (in Russian), Dokl. Akad. Nauk SSSR 27, 335–339.German translation: Papkovitch PF (1940), Uber eine Form der Lösung des biharmonischen Problems für das Rechteck, CR (Doklady) Acad. Sci. URSS 27, 334–338. (German reviews in Jbuch. Fortschr. Math. 66, 453; Zentralblatt Math 23, 127–128; English review by E Reissner in Math. Revs. 2, 332.)
Fadle  J (1940), Die Selbstspannungs-Eigenwertfunktionen der quadratischen Scheibe, Ing.-Arch. 11, 125–148.
Fadle J 1940, Die Selbstspannungs-Eigenwertfun-ktionen der quadratischen Scheibe, (dissertation), Teubner, Berlin.
Papkovich  PF (1941), Two questions of the theory of bending of thin elastic plates (in Russian), Prikl. Mat. Mekh. 5, 359–374.(English review in Math. Revs. 4, 230.)
Smith  RCT (1952), The bending of a semi-infinite strip, Austr. J. Sci. Res. A5, 227–237.
Gomilko  AM and Meleshko  VV (1986), Filon’s method of series expansion of functions in homogeneous solutions in problem of elasticity, Mech. Solids 21(4), 49–55.
Koepcke W (1940), Umfangsgelagerte Rechteckplatten mit drehbaren und eigespannten Rändern (Dissertation), Noske, Leipzig.
Gurevich  SG (1955), Stress distribution in a rectangular plate arbitrary loaded along the edges (in Russian), Izvestiya Leningrad. Elektrotech. Inst. 27, 77–122.
Gaydon  FA (1965), The rectangle, under general equilibrium loading, in generalized plane stress, Proc. R. Soc. London, Ser. A 283, 356–378.
Gaydon  FA (1965), The rectangle in generalized plane stress, with numerically prescribed boundary stresses and applications to discontinuous loading, Proc. R. Soc. London, Ser. A 286, 251–269.
Keldysh  MV (1951), On eigenvalues and eigenfunctions of some classes of non-self-adjoint equations (in Russian), Dokl. Akad. Nauk SSSR 77, 11–14.
Kitover  KA (1952), On the use of special systems of biharmonic functions for the solution of some problems of the theory of elasticity (in Russian), Prikl. Mat. Mekh. 16, 739–748.(English review in Math. Revs. 14, 1037.)
Grinberg  GA (1953), On a method applied by PF Papkovich for the solution of the plane problem of the theory of elasticity for a rectangular region and of problem of bending of a rectangular thin plate with two clamped edges, and on some of its generalizations (in Russian), Prikl. Mat. Mekh. 17, 211–228.(English review in Math. Revs. 14, 1143.)
Wegner  U (1956), Berechnung von teilweise eingespannten rechteckigen Platten bei Vorgabe von Randmomenten, Z. Angew. Math. Mech. 36, 340–355.
Prokopov  VK (1964), On the relation of the generalized orthogonality of PF Papkovich for rectangular plates (in Russian), Prikl. Mat. Mekh. 28, 351–355. (English translation: J. Appl. Math. Mech. 28, 428–439.)
Gusein-Zade  MI (1965), On conditions of existence of decaying solutions of the two-dimensional problem of the theory of elasticity for a semi-finite strip (in Russian), Prikl. Mat. Mekh. 29, 393–399. (English translation: J. Appl. Math. Mech.29 , 447–454.)
Gusein-Zade  MI (1965), On necessary and sufficient conditions for the existence of decaying solutions of the plane problem of the theory of elasticity for a semistrip (in Russian), Prikl. Mat. Mekh. 29, 752–760. (English translation: J. Appl. Math. Mech.29 , 892–901.)
Vorovich  II and Koval’chuk  VE (1967), On the basic properties of a system of homogeneous solutions (in Russian), Prikl. Mat. Mekh. 31, 861–870. (English translation: J. Appl. Math. Mech.31 , 869–877.)
Koval’chuk  VE (1969), On the behaviour of the solution of the first fundamental problem of the theory of elasticity for a long rectangular plate (in Russian), Prikl. Mat. Mekh. 33, 511–518. (English translation: J. Appl. Math. Mech.33 , 495–503.)
Ustinov  YuA and Yudovich  VI (1973), On the completeness of a system of elementary solutions of the biharmonic equation in a semistrip (in Russian), Prikl. Mat. Mekh. 37, 706–714. (English translation: J. Appl. Math. Mech.37 , 665–674.)
Joseph  DD (1977), The convergence of biorthogonal series for biharmonic and Stokes flow edge problems: Part I, SIAM (Soc. Ind. Appl. Math.) J. Appl. Math. 33, 337–347.
Joseph  DD and Sturges  L (1978), The convergence of biorthogonal series for biharmonic and Stokes flow edge problems: Part II, SIAM (Soc. Ind. Appl. Math.) J. Appl. Math. 34, 7–26.
Gregory  RD (1979), Green’s functions, bi-linear forms, and completeness of the eigenfunctions for the elastostatic strip and wedge, J. Elast. 9, 283–309.
Gregory  RD (1980), The traction boundary value problem for the elastostatic semi-infinite strip, existence of solution and completeness of the Papkovich–Fadle eigenfunctions, J. Elast. 10, 295–327.
Gregory  RD (1984), The semi-infinite strip x≥0,−1≤y≤1; completeness of the Papkovich-Fadle eigenfunctions when ϕxy(0,y),ϕyy(0,y) are prescribed, J. Elast. 14, 27–64.
Joseph  DD, Sturges  L, and Warner  W H (1982), Convergence of biorthogonal series of biharmonic eigenfunctions by the method of Titchmarsh, Arch. Ration. Mech. Anal. 78, 229–279.
Spence  DA (1983), A class of biharmonic end-strip problems arising in elasticity and Stokes flow, IMA J. Appl. Math. 30, 107–139.
Lurie SA and Vasiliev VV (1995), The Biharmonic Problem in the Theory of Elasticity, Gordon and Breach, Amsterdam.
Dzhanelidze GYu and Prokopov VK (1964), Method of homogeneous solutions in the mathematical theory of elasticity (in Russian), Trudy IV Vsesoyuznogo Matematicheskogo S’ezda, Nauka, Leningrad, 2 , 551–557.
Vorovich II (1966), Some mathematical problems in the theory of plates and shells, Trudy II Vsesoyuznogo S’ezda po Teoreticheskoi i Prikladnoi Mekhanike (in Russian), AS Vol’mir and GK Mikhailov (eds), Nauka, Moscow, 3 , 116–136.
Prokopov VK (1966), Homogeneous solutions in the theory of elasticity and their applications to the theory of thin plates, Trudy II Vsesoyuznogo S’ezda po Teoreticheskoi i Prikladnoi Mekhanike, (in Russian), AS Vol’mir and GK Mikhailov (eds), Nauka, Moscow, 3 , 253–259.
Prokopov VK (1967), A survey of works on homogeneous solutions in the theory of elasticity and their applications (in Russian), Trudy Leningrad Politechn. Inst. No. 279, 31–46.
Grinberg  GA and Ufliand  Ya S (1949), On bending of a clamped rectangular plate under arbitrary loading (in Russian), Prikl. Mat. Mekh. 13, 413–434.
Grinberg  GA (1951), On the solution of the plane problem of the theory of elasticity and of the problem of bending of a thin plate with clamped contour (in Russian), Dokl. Akad. Nauk SSSR 76, 661–664.(English review in Appl. Mech. Rev. 4, No. 3800 Math. Revs. 13, 184.)
Grinberg  GA, Lebedev  NN and Ufliand  Ya S (1953), A method of solution of a general biharmonic problem for a rectangular region with given values of the function and its normal derivative on the contour (in Russian), Prikl. Mat. Mekh. 17, 73–86.(English review in Math. Revs. 15, 425.)
Morley  LSD (1963), Simple series solution for the bending of a clamped rectangular plate under uniform normal load, Q. J. Mech. Appl. Math. 16, 109–114.
Sturges  LD (1986), Stokes flow in a two-dimensional cavity with moving end walls, Phys. Fluids 29, 1731–1734.
Shankar  PN (1993), The eddy structure in Stokes flow in a cavity, J. Fluid Mech. 250, 371–383.
Srinivasan  R (1995), Accurate solutions for steady plane flow in the driven cavity. I. Stokes flow, Z. Angew. Math. Phys. 46, 524–545.
Inglis  CE (1947), Solid body mechanics in relation to mechanical engineering, Proc. Inst. Mech. Eng. 157, 271–274.
Truesdell C (1962), Reactions of the history of mechanics upon modern research, Proc of 4th US Natl Congress on Applied Mechanics, RM Rosenberg (ed), 35–47.
Gaiduk  YuM and Naumov  IA (1965), Russian pages of G Lamé’s biography, (in Russian), Istor.-Mat. Issled. 16, 337–372.
Bradley  M (1981), Franco-Russian engineering links: the careers of Lamé and Clapeyron, 1820–1830, Ann. Sci. 38, 291–312.
Greitzer SL (1973), Lamé, Gabriel, Dictionary Scientific Biography, CC Gillispie (ed), Scribner, New York, X , 601–602.
Voronina MM (1987), Gabriel Lamé (in Russian), Nauka, Leningrad.
Lamé G (1865), Cours de physique mathématique rationnelle, 1861. Discours préliminaire, Gauthier-Villars, Paris.

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In