0
REVIEW ARTICLES

Fatigue damage modeling of fibre-reinforced composite materials: Review

[+] Author and Article Information
Joris Degrieck, Wim Van Paepegem

Department of Mechanical Construction and Production, Ghent University, Sint-Pietersnieuwstraat 41, 9000 Gent, Belgium; joris.degrieck@rug.ac.be, Wim.VanPaepegem@rug.ac.be

Appl. Mech. Rev 54(4), 279-300 (Jul 01, 2001) (22 pages) doi:10.1115/1.1381395 History:
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.

References

Fong JT (1982), What is fatigue damage? In: Reifsnider KL (ed), Damage in composite materials. ASTM STP 775. Am Soc for Testing and Materials, 243–266.
Schulte K, Baron Ch, Neubert H, Bader MG, Boniface L, Wevers M, Verpoest I, and de Charentenay FX (1985), Damage development in carbon fibre epoxy laminates: cyclic loading. In: Proc of MRS-Symp Advanced Materials for Transport, Nov 1985, Strassbourg, p 8.
Daniel  IM and Charewicz  A (1986), Fatigue damage mechanisms and residual properties of graphite/epoxy laminates, Eng. Fract. Mech., 25, 793–808.
Barnard PM, Butler RJ, and Curtis PT (1985), Fatigue scatter of UD glass epoxy, a fact or fiction? In: Marshall IH (ed), Composite Structures 3, Proc of 3rd Int Conf on Composite Structures (ICCS-3), 9–11 September 1985, Scotland, Elsevier, 69–82.
Hwang  W and Han  KS (1986a), Cumulative damage models and multi-stress fatigue life prediction, J. Compos. Mater., 20, 125–153.
Farrow IR (1989), Damage accumulation and degradation of composite laminates under aircraft service loading: assessment and prediction. Volumes I and II. Cranfield Inst of Tech, PhD thesis.
Ellyin F and Kujawski D (1992), Fatigue testing and life prediction of fibreglass-reinforced composites. In: Neale KW and Labossière P (eds), 1st Int Conf on Advanced Composite Materials in Bridges and Structures (ACMBS-I), 1992, Sherbrooke, Québec, Canada, Canadian Soc for Civil Eng, 111–118.
Sendeckyj GP (1990), Life prediction for resin-matrix composite materials. In: Reifsnider KL (ed), Fatigue of composite materials. Composite Material Series 4. Elsevier, 431–483.
Highsmith AL and Reifsnider KL (1982), Stiffness-reduction mechanisms in composite laminates. In: Reifsnider KL (ed), Damage in composite materials. ASTM STP 775. Am Soc for Testing and Materials, 103–117.
Sendeckyj GP (1981), Fitting models to composite materials fatigue data. In: Chamis CC (ed), Test methods and design allowables for fibrous composites. ASTM STP 734. Am Soc for Testing and Materials, 245–260.
Hahn  HT and Kim  RY (1975), Proof testing of composite materials, J. Compos. Mater. 9, 297–311.
Chou  PC and Croman  R (1978), Residual Strength in Fatigue Based on the Strength-Life Equal Rank Assumption, J. Compos. Mater. 12, 177–194.
Harris B (1985), Fatigue behavior of polymer-based composites and life prediction methods. AIB-Vinçotte Leerstoel, 2 maart 1995, Belgium, Nationaal Fonds voor Wetenschappelijk Onderzoek, p 28.
Schaff  JR and Davidson  BD (1997a), Life prediction methodology for composite structures. Part I—Constant amplitude and two-stress level fatigue, J. Compos. Mater. 31, 128–157.
Hahn  HT and Kim  RY (1976), Fatigue behavior of composite laminates, J. Compos. Mater. 10, 156–180.
O’Brien  TK and Reifsnider  KL, (1981), Fatigue damage evaluation through stiffness measurements in boron-epoxy laminates, J. Compos. Mater. 15, 55–70.
Goetchius GM (1987), Fatigue of composite materials. In: Advanced Composite III. Expanding the Technology. Proc of 3rd Annual Conf on Advanced Composites, 15–17 Sept 1987, 289–298.
Reifsnider KL (1990), Introduction. In: Reifsnider KL (ed), Fatigue of Composite Materials. Composite Material Series 4. Elsevier, 1–9.
Stinchcomb WW and Bakis CB (1990), Fatigue behavior of composite laminates. In: Reifsnider KL (ed), Fatigue of Composite Materials. Composite Material Series 4, Elsevier, 105–180.
Saunders  DS and Clark  G (1993), Fatigue damage in composite laminates, Mater. Forum 17, 309–331.
Hashin  Z and Rotem  A (1973), A fatigue criterion for fibre reinforced composite materials, J. Compos. Mater. 7, 448–464.
Ellyin  F and El-Kadi  H (1990), A fatigue failure criterion for fiber reinforced composite laminae, Compos. Struct. 15, 61–74.
Reifsnider  KL and Gao  Z (1991), A micromechanics model for composites under fatigue loading, Int. J. Fatigue 13, 149–156.
Lawrence Wu  CM (1993), Thermal and mechanical fatigue analysis of CFRP laminates, Compos. Struct. 25, 339–344.
Fawaz  Z and Ellyin  F (1994), Fatigue failure model for fibre-reinforced materials under general loading conditions, J. Compos. Mater. 28, 1432–1451.
Adam  T, Gathercole  N, Reiter  H, and Harris  B (1994), Life prediction for fatigue of T800/5245 carbon-fibre composites: II. Variable-amplitude loading, Int. J. Fatigue 16, 533–547.
Gathercole  N, Reiter  H, Adam  T, and Harris  B (1994), Life prediction for fatigue of T800/5245 carbon-fibre composites: I. Constant-amplitude loading, Int. J. Fatigue 16, 523–532.
Beheshty  MH and Harris  B (1998), A constant-life model of fatigue behavior for carbon-fibre composites: the effect of impact damage, Compos. Sci. Technol. 58, 9–18.
Beheshty  MH, Harris  B, and Adam  T (1999), An empirical fatigue-life model for high-performance fibre composites with and without impact damage, Composites, Part A 30, 971–987.
Andersons J and Korsgaard J (1997), The effect of stress ratio on durability and damage accumulation in GRP at uniaxial loading. In: Degallaix S, Bathias C, and Fougères R (eds), Int Conf on Fatigue of Composites. Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 315–322.
Jen  MHR and Lee  CH (1998a), Strength and life in thermoplastic composite laminates under static and fatigue loads. Part I: Experimental, Int. J. Fatigue 20, 605–615.
Jen  MHR and Lee  CH (1998b), Strength and life in thermoplastic co mposite laminates under static and fatigue loads. Part II: Formulation, Int. J. Fatigue 20, 617–629.
Philippidis  TP and Vassilopoulos  AP (1999), Fatigue strength prediction under multiaxial stress, J. Compos. Mater. 33, 1578–1599.
Plumtree  A and Cheng  GX (1999), A fatigue damage parameter for off-axis unidirectional fibre-reinforced composites, Int. J. Fatigue 21, 849–856.
Bond  IP (1999), Fatigue life prediction for GRP subjected to variable amplitude loading, Composites, Part A 30, 961–970.
Castillo  EAS, Fernandez-Canteli  A, and Hadi  AS (1999), On fitting a fatigue model to data, Int. J. Fatigue 21, 97–106.
Revuelta  D, Cuartero  J, Miravete  A, and Clemente  R (2000), A new approach to fatigue analysis in composites based on residual strength degradation, Compos. Struct. 48, 183–186.
Xiao  XR (1999), Modeling of load frequency effect on fatigue life of thermoplastic composites, J. Compos. Mater. 33, 1141–1158.
Miyano  Y, McMurray  MK, Enyama  J, and Nakada  M (1994), Loading rate and temperature dependence on flexural fatigue behavior of a satin woven CFRP laminate, J. Compos. Mater. 28, 1250–1260.
Miyano  Y, Nakada  M, Kudoh  H, and Muki  R (2000), Prediction of tensile fatigue life for unidirectional CFRP, J. Compos. Mater. 34, 538–550.
Epaarachchi JA and Clausen PD (2000), A new approach to a fatigue damage model for glass-fibre reinforced plastic composites. In: Hui D (ed), Proc of 7th Int Conf on Composites Engineering (ICCE/7), Denver CO, 2–8 July 2000, 211–212.
Hwang  W and Han  KS (1986b), Fatigue of composites - Fatigue modulus concept and life prediction, J. Compos. Mater. 20, 154–165.
Kam  TY, Chu  KH, and Tsai  SY (1998), Fatigue reliability evaluation for composite laminates via a direct numerical integration technique, Int. J. Solids Struct. 35, 1411–1423.
Kam  TY, Tsai  SY, and Chu  KH (1997), Fatigue reliability analysis of composite laminates under spectrum stress, Int. J. Solids Struct. 34, 1441–1461.
Fatemi  A and Yang  L (1998), Cumulative fatigue damage and life prediction theories: A survey of the state of the art for homogeneous materials, Int. J. Fatigue 20, 9–34.
Sidoroff F and Subagio B (1987), Fatigue damage modeling of composite materials from bending tests. In: Matthews FL, Buskell NCR, Hodgkinson JM, and Morton J (eds), 6th Int Conf on Composite Materials (ICCM-VI) & Second European Conf on Composite Materials (ECCM-II): Volume 4. Proc, 20-24 July 1987, London, UK, Elsevier, 4.32–4.39.
Van Paepegem W and Degrieck J (2000b), Numerical modeling of fatigue degradation of fibre-reinforced composite materials. In: Topping BHV (ed), Proc of 5th Int Conf on Computational Structures Technology. Volume F: Computational Techniques for Materials, Composites and Composite Structures, Leuven, 6–8 Sept 2000, Civil-Comp Press, 319–326.
Van Paepegem  W and Degrieck  J (2001), Experimental setup for and numerical modeling of bending fatigue experiments on plain woven glass/epoxy composites, Compos. Struct. 51, 1–8.
Vieillevigne S, Jeulin D, Renard J, and Sicot N (1997), Modeling of the fatigue behavior of a unidirectional glass epoxy composite submitted to fatigue loadings. In: Degallaix S, Bathias C, and Fougères R (eds), Int Conf on Fatigue of Composites. Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 424–430.
Kawai M (1999), Damage mechanics model for off-axis fatigue behavior of unidirectional carbon fiber-reinforced composites at room and high temperatures. In: Massard T and Vautrin A (eds), Proc of 12th Int Conf on Composite Materials (ICCM-12). Paris, France, 5–9 July 1999, 322.
Whitworth  HA (1987), Modeling stiffness reduction of graphite epoxy composite laminates, J. Compos. Mater. 21, 362–372.
Whitworth  HA (1990), Cumulative damage in composites, J. Eng. Mater. Technol. 112, 358–361.
Whitworth  HA (1998), A stiffness degradation model for composite laminates under fatigue loading, Compos. Struct. 40, 95–101.
Yang  JN, Jones  DL, Yang  SH, and Meskini  A (1990), A stiffness degradation model for graphite/epoxy laminates, J. Compos. Mater. 24, 753–769.
Yang  JN, Lee  LJ, and Sheu  DY (1992), Modulus reduction and fatigue damage of matrix dominated composite laminates, Compos. Struct. 21, 91–100.
Lee  LJ, Fu  KE, and Yang  JN (1996), Prediction of fatigue damage and life for composite laminates under service loading spectra, Compos. Sci. Technol. 56, 635–648.
Hansen U (1997), Damage development in woven fabric composites during tension-tension fatigue. In: Andersen SI, Bro̸ndsted P, Lilholt H, Lystrup Aa, Rheinländer JT, So̸rensen BF, and Toftegaard H (eds), Polymeric Composites—Expanding the Limits. Proc of 18th Riso̸ Int Symp on Materials Science, 1–5 Sept 1997, Roskilde, Denmark, Riso̸ Int Lab, 345–351.
Hansen  U (1999), Damage development in woven fabric composites during tension-tension fatigue, J. Compos. Mater. 33, 614–639.
Bro̸ndsted P, Andersen SI, and Lilholt H (1997a), Fatigue damage accumulation and lifetime prediction of GFRP materials under block loading and stochastic loading. In: Andersen SI, Bro̸ndsted P, Lilholt H, Lystrup Aa, Rheinländer JT, So̸rensen BF, and Toftegaard H (eds), Polymeric Composites—Expanding the Limits. Proc of 18th Riso̸ Int Symp on Materials Science, 1–5 Sept 1997, Roskilde, Denmark, Riso̸ Int Lab, 269–278.
Bro̸ndsted P, Lilholt H, and Andersen SI (1997b), Fatigue damage prediction by measurements of the stiffness degradation in polymer matrix composites. In: Degallaix S, Bathias C, and Fougères R (eds), International Conference on fatigue of composites. Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 370–377.
Chou PC and Croman R (1979), Degradation and sudden-death models of fatigue of graphite/epoxy composites. In: Tsai SW (ed), Composite materials: Testing and design (5th Conf) ASTM STP 674, Philadelphia, Am Soc for Testing and Materials, 431–454.
Halpin JC, Jerina KL, and Johnson TA (1973), Characterization of composites for the purpose of reliability evaluation. In: Analysis of the test methods for high modulus fibers and composites. ASTM STP 521, 5–64.
Yang  YN (1978), Fatigue and residual strength degradation for graphite/epoxy composites under tension-compression cyclic loadings, J. Compos. Mater. 12, 19–39.
Kedward  KT and Beaumont  PWR (1992), The treatment of fatigue and damage accumulation in composite design, Int. J. Fatigue 14, 283–294.
Yang JN and Jones DL (1981), Load sequence effects on the fatigue of unnotched composite materials. In: Lauraitis KN (ed), Fatigue of fibrous composite materials. ASTM STP 723. Philadelphia, Am Soc for Testing and Materials, 213–232.
Rotem  A (1986), Fatigue and residual strength of composite laminates, Eng. Fract. Mech. 25, 819–827.
Rotem  A (1991), The fatigue behavior of composite laminates under various mean stresses, Compos. Struct. 17, 113–126.
Schaff  JR and Davidson  BD (1997b), Life prediction methodology for composite structures. Part II—Spectrum fatigue, J. Compos. Mater. 31, 158–181.
Caprino  G and D’Amore  A (1998), Flexural fatigue behavior of random continuous-fibre-reinforced thermoplastic composites, Compos. Sci. Technol. 58, 957–965.
Caprino  G, D’Amore  A, and Facciolo  F (1998), Fatigue sensitivity of random glass fibre reinforced plastics, J. Compos. Mater. 32, 1203–1220.
Caprino  G and Giorleo  G (1999), Fatigue lifetime of glass fabric/epoxy composites, Composites, Part A 30, 299–304.
Caprino  G (2000), Predicting fatigue life of composite laminates subjected to tension-tension fatigue, J. Compos. Mater. 34, 1334–1355.
Whitworth  HA (2000), Evaluation of the residual strength degradation in composite laminates under fatigue loading, Compos. Struct. 48, 261–264.
Yao  WX and Himmel  N (2000), A new cumulative fatigue damage model for fibre-reinforced plastics, Compos. Sci. Technol. 60, 59–64.
Owen MJ and Bishop PT (1974), Prediction of static and fatigue damage and crack propagation in composite materials. In: Advisory Group for Aerospace Research and Development (AGARD), Failure modes of composite materials with organic matrices and their consequences on design. AGARD Conf Proc No 163 (CP-163), 1.1-1.12.
Biner  SB and Yuhas  VC (1989), Growth of short fatigue cracks at notches in woven fiber glass reinforced polymeric composites, J. Eng. Mater. Technol. 111, 363–367.
Bergmann  HW and Prinz  R (1989), Fatigue life estimation of graphite/epoxy laminates under consideration of delamination growth, Int. J. Numer. Methods Eng. 27, 323–341.
Prinz R (1990), Damage rates for interlaminar failure of fatigue CFRP laminates. In: Füller J, Grüninger G, Schulte K, Bunsell AR, and Massiah A, (eds), Developments in the science and technology of composite materials. Proc of 4th European Conf on Composite Materials (ECCM/4), 25–28 Sept 1990, Stuttgart, Elsevier Appl Sci, 189–193.
Dahlen  C and Springer  GS (1994), Delamination growth in composites under cyclic loads, J. Compos. Mater. 28, 732–781.
Xiao  J and Bathias  C (1994a), Fatigue behavior of unnotched and notched woven glass/epoxy laminates, Compos. Sci. Technol. 50, 141–148.
Xiao  J and Bathias  C (1994b), Fatigue damage and fracture mechanism of notched woven laminates, J. Compos. Mater. 28, 1127–1139.
Feng X, Gilchrist MD, Kinloch AJ, and Matthews FL (1997), Development of a method for predicting the fatigue life of CFRP components. In: Degallaix S, Bathias C, and Fougères R (eds), Int Conf on Fatigue of Composites. Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 407–414.
Henaff-Gardin C, Lafarie-Frenot MC, and Goupillaud I (1997), Prediction of cracking evolution under uniaxial fatigue loading in cross-ply composite laminates. In: Degallaix S, Bathias C, and Fougères R (eds), Int Conf on Fatigue of Composites: Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 189–196.
Henaff-Gardin C, Lafarie-Frenot MC, and Goupillaud I (2000), The use of a characteristic damage variable in the study of transverse cracking development under fatigue loading in cross-ply laminates. In: Proc of 2nd Int Conf on Fatigue of Composites. 4–7 June 2000, Williamsburg, 7.4–7.5.
Gamby D, Henaff-Gardin C, Lafarie-Frenot MC, Tahiri V, and Thevenet D (1997), A model for damage growth in aeronautical composite laminates subjected to tensile fatigue loading. In: Degallaix S, Bathias C, and Fougères R (eds.), Int Conf on Fatigue of Composites. Proceedings, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 386–392.
Bartley-Cho  J, Lim  SG, Hahn  HT, and Shyprykevich  P (1998), Damage accumulation in quasi-isotropic graphite/epoxy laminates under constant-amplitude fatigue and block loading, Compos. Sci. Technol. 58, 1535–1547.
Bucinell  RG (1998), Development of a stochastic free edge delamination model for laminated composite materials subjected to constant amplitude fatigue loading, J. Compos. Mater. 32, 1138–1156.
Schön  J (2000), A model of fatigue delamination in composites, Compos. Sci. Technol. 60, 553–558.
Nuismer  RJ and Tan  SC (1988), Constitutive relations of a cracked composite lamina, J. Compos. Mater. 22, 306–321.
Brillaud  J and El Mahi  A (1991), Numerical simulation of the influence of stacking sequence on transverse ply cracking in composite laminates, Compos. Struct. 17, 23–35.
El Mahi  A, Berthelot  JM, and Brillaud  J (1995), Stiffness reduction and energy release rate of cross-ply laminates during fatigue tests, Compos. Struct. 30, 123–130.
Joffe  R and Varna  J (1999), Analytical modeling of stiffness reduction in symmetric and balanced laminates due to cracks in 90° layers, Compos. Sci. Technol. 59, 1641–1652.
Pradhan  B, Venu Kumar  N, and Rao  NS (1999), Stiffness degradation resulting from 90° ply cracking in angle-ply composite laminates, Compos. Sci. Technol. 59, 1543–1552.
Smith  PA and Ogin  SL (1999), On transverse matrix cracking in cross-ply laminates loaded in simple bending, Composites, Part A 30, 1003–1008.
Kashtalyan  M and Soutis  C (2000), Stiffness degradation in cross-ply laminates damaged by transverse cracking and splitting, Composites, Part A 31, 335–351.
Reifsnider  KL (1986), The critical element model: a modeling philosophy, Eng. Fract. Mech. 25, 739–749.
Reifsnider KL (1987), Life prediction analysis: directions and divagations. In: Matthews FL, Buskell NCR, Hodgkinson JM, and Morton J (eds), 6th Int Conf on Composite Materials (ICCM-VI) and 2nd European Conf on Composite Materials (ECCM-II): Volume 4. Proc, 20–24 July 1987, London, UK, Elsevier, 4.1–4.31.
Diao  X, Ye  L, and Mai  YW (1995), A statistical model of residual strength and fatigue life of composite laminates, Compos. Sci. Technol. 54, 329–336.
Subramanian  S, Reifsnider  KL, and Stinchcomb  WW (1995), A cumulative damage model to predict the fatigue life of composite laminates including the effect of a fibre-matrix interphase, Int. J. Fatigue 17, 343–351.
Halverson  HG, Curtin  WA, and Reifsnider  KL (1997), Fatigue life of individual composite specimens based on intrinsic fatigue behavior, Int. J. Fatigue 19, 369–377.
Talreja  R (1986), Stiffness properties of composite laminates with matrix cracking and interior delamination, Eng. Fract. Mech. 25, 751–762.
Talreja R (1990), Damage mechanics of composite materials based on thermodynamics with internal variables. In: Cardon AH and Verchery G (eds.), Durability of polymer based composite systems for structural applications. Proc of the Int Colloquium, 27–31 Aug 1990, Brussels, Belgium, Elsevier, 65–79.
Talreja  R, Yalvac  S, Yats  LD, and Wetters  DG (1992), Transverse cracking and stiffness reduction in cross-ply laminates of different matrix toughness, J. Compos. Mater. 26, 1644–1663.
Bonora  N, La Barbera  A, Marchetti  M, and Milella  P (1993), Experimental verification and theoretical simulation of fracture behaviors of composite materials, Compos. Struct. 23, 87–97.
Allen  DH, Harris  CE, and Groves  SE (1987a), A thermomechanical constitutive theory for elastic composites with distributed damage—I. Theoretical development, Int. J. Solids Struct. 23, 1301–1318.
Allen  DH, Harris  CE, and Groves  SE (1987b), A thermomechanical constitutive theory for elastic composites with distributed damage—II. Application to matrix cracking in laminated composites, Int. J. Solids Struct. 23, 1319–1338.
Allen DH, Highsmith AL, and Lo DC (1990), A continuum damage mechanics model for life prediction of laminated composites. In: Cardon AH and Verchery G (eds), Durability of polymer based composite systems for structural applications, Proc of Int Colloquium, 27–31 Aug 1990, Brussels, Belgium, Elsevier, 119–128.
Lee  JW, Allen  DH, and Harris  CE (1989), Internal state variable approach for predicting stiffness reductions in fibrous laminated composites with matrix cracks, J. Compos. Mater. 23, 1273–1291.
Coats  TW and Harris  CE (1995), Experimental verification of a progressive damage model for IM7/5260 laminates subjected to tension-tension fatigue, J. Compos. Mater. 29, 280–305.
Ogin  SL, Smith  PA, and Beaumont  PWR (1985), Matrix cracking and stiffness reduction during the fatigue of a (0/90)s GFRP laminate, Compos. Sci. Technol. 22, 23–31.
Beaumont PWR (1987), The fatigue damage mechanics of composite laminates. In: Wang ASD and Haritos GK (eds), Damage Mechanics in Composites. Presented at the Winter Annual Meeting of the ASME, 13–18 Dec 1987, Boston MA, ASME, 53–63.
Beaumont PWR (1990), The mechanics of fatigue damage in structural composite materials. In: Füller J, Grüninger G, Schulte K, Bunsell AR, and Massiah A (eds), Developments in the science and technology of composite materials. Proc of 4th European Conf on Composite Materials (ECCM/4), 25–28 Sept. 1990, Stuttgart, Elsevier Appl Sci, 195–205.
Carswell  WS (1988), Damage mechanics and composite behavior, Compos. Struct. 10, 335–342.
Beaumont PWR and Spearing SM (1990), Development of fatigue damage mechanics for application to the design of structural composite components. In: Vautrin A and Sol H (eds), Mechanical identification of composites. Proc of the European Mechanics Colloquium 269, 3–6 Dec 1990, Saint-Etienne, France, Elsevier, 311–326.
Spearing  SM and Beaumont  PWR (1992a), Fatigue damage mechanics of composite materials. I: Experimental measurement of damage and post-fatigue properties, Compos. Sci. Technol. 44, 159–168.
Spearing  SM and Beaumont  PWR (1992b), Fatigue damage mechanics of composite materials. Part III: Prediction of post-fatigue strength, Compos. Sci. Technol. 44, 299–307.
Spearing  SM, Beaumont  PWR, and Ashby  MF (1992a), Fatigue damage mechanics of composite materials. II: A damage growth model, Compos. Sci. Technol. 44, 169–177.
Spearing  SM, Beaumont  PWR, and Smith  PA (1992b), Fatigue damage mechanics of composite materials. Part IV: Prediction of post-fatigue stiffness, Compos. Sci. Technol. 44, 309–317.
Caron JF and Ehrlacher A (1997), Modeling of fatigue microcracking kinetics in crossply and experimental validation. In: Degallaix S, Bathias C, and Fougères R (eds.), Int Conf on Fatigue of Composites. Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 378–385.
Ladevèze P (1990), A damage approach for composite structures: theory and identification. In: Vautrin A and Sol H (eds.), Mechanical identification of composites. Proc of European Mechanics Colloquium 269, 3–6 Dec 1990, St-Etienne, France, Elsevier, 44–57.
Ladevèze  P (1992), A damage computational method for composite structures, Comput. Struct. 44, 79–87.
Allix  O and Ladevèze  P (1992), Interlaminar interface modeling for the prediction of delamination, Compos. Struct. 22, 235–242.
Allix  O, Léve⁁que  D, and Perret  L (1998), Identification and forecast of delamination in composite laminates by an interlaminar interface model, Compos. Sci. Technol. 58, 671–678.
Allix  O and Corigliano  A (1999), Geometrical and interfacial non-linearities in the analysis of delamination in composites, Int. J. Solids Struct. 36, 2189–2216.
Sedrakian A, Ben Zineb T, Billoet JL, Sicot N, and Lardeur P (1997), A numerical model of fatigue behavior for composite plates: application to a three point bending test. In: Degallaix S, Bathias C, and Fougères R (eds), Int Conf on fatigue of composites. Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 415–423.
Sedrakian A, Ben Zineb T, Billoet JL, and Bobet V (2000), Fatigue behavior simulation of industrial composite parts. In: Proc of 2nd Int Conf on Fatigue of Composites. 4–7 June 2000, Williamsburg, 4.5–4.6.
Thionnet  A and Renard  J (1994), Laminated composites under fatigue loading: a damage development law for transverse cracking, Compos. Sci. Technol. 52, 173–181.
Thionnet A and Renard J (1997), Modeling of the fatigue behavior of laminated composite structures. In: Degallaix S, Bathias C, and Fougères R (eds), Int Conf on Fatigue of Composites. Proc, 3–5 June 1997, Paris, France, La Société Française de Métallurgie et de Matériaux, 363–369.
Thionnet A and Renard J (1999), Modeling of fatigue behavior in composite laminates. In: Massard T and Vautrin A (eds), Proc of 12th Int Conf on Composite Materials (ICCM-12). Paris, France, 5–9 July 1999, p. 363.
Liu  B and Lessard  LB (1994), Fatigue and damage-tolerance analysis of composite laminates: stiffness loss, damage-modeling, and life prediction, Compos. Sci. Technol. 51, 43–51.
Shokrieh MM (1996), Progressive fatigue damage modeling of composite materials. PhD thesis, McGill Univ, Montréal, Canada.
Shokrieh  MM and Lessard  LB (1997a), Multiaxial fatigue behavior of unidirectional plies based on uniaxial fatigue experiments—I. Modeling, Int. J. Fatigue 19, 201–207.
Shokrieh  MM and Lessard  LB (1997b), Multiaxial fatigue behavior of unidirectional plies based on uniaxial fatigue experiments—II. Experimental evaluation, Int. J. Fatigue 19, 209–217.
Shokrieh MM, and Lessard LB (1998), Residual fatigue life simulation of laminated composites. In: Gowayed Y and Abd El Hady F (eds), Proc of Int Conf on Advanced Composites (ICAC 98), 15–18 Dec 1998, Hurghada, Egypt, 79–86.
Shokrieh  MM and Lessard  LB (2000a), Progressive fatigue damage modeling of composite materials, Part I: Modeling, J. Compos. Mater. 34, 1056–1080.
Shokrieh  MM and Lessard  LB (2000b), Progressive fatigue damage modeling of composite materials, Part II: Material characterization and model verification, J. Compos. Mater. 34, 1081–1116.
Diao  X, Lessard  LB, and Shokrieh  MM (1999), Statistical model for multiaxial fatigue behavior of unidirectional plies, Compos. Sci. Technol. 59, 2025–2035.
Hashin  Z (1985), Cumulative damage theory for composite materials: residual life and residual strength methods, Compos. Sci. Technol. 23, 1–19.
Salkind MJ (1972), Fatigue of composites. In: Corten HT (ed), Composite Materials Testing and Design (2nd Conf). ASTM STP 497. Baltimore, Am Soc for Testing and Materials, 143–169.
Talreja R (2000), Fatigue damage evolution in composites—A new way forward in modeling. In: Proc of 2nd Int Conf on Fatigue of Composites. 4–7 June 2000, Williamsburg, 9.1.
Van Paepegem W and Degrieck J (2000a), Experimental setup for the bending fatigue of fibre-reinforced composite materials. In: Bache MR, Blackmore PA, Draper J, Edwards JH, Roberts P, and Yates JR (eds), Fatigue 2000: Fatigue and Durability assessment of materials, components and structures. Proc, Cambridge, 10–12 April 2000, Chameleon Press, 115–122.

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In